Playback
Playback
Settings for Playback
28
Chapter 2 Recording and Playback
This section describes the necessary settings and operations to perform
playback on this unit. The same settings and operations apply whether you
are using the unit as part of an editing system, for dubbing, or as a stand-
alone videocassette player. For the necessary connections for playback
and the settings not covered in this section, see Chapter 5 "Connections
and Settings".
Player (DSR-85/85P)
1
1
Power on this unit by pressing on the "1" side of the POWER switch.
2
Power on the video monitor and set the monitor's switches as shown
below.
Switch
Setting
75
termination switch
ON (or attach a 75
Input switch
Set according to the type of input signal from this unit.
Video monitor
2
6
0
)
p
r
terminator)