Sony 85P Operating Instructions Manual page 13

Digital video cassette recorder
Table of Contents

Advertisement

4 Menu control panel
The menu control panel is located on the inside of the
door at the lower front of the unit. Press on the top of
the door to open it.
1 SYNC PHASE control
2 SC PHASE control
SYNC PHASE
SC PHASE
MONITOR SELECT
CH-
CH-
CH-
1/2
3/4
1/3
MIX
8 MONITOR SELECT switches
1 SYNC (synchronization) PHASE control
Turn this control to accurately adjust the
synchronization phase of the output video signal of the
unit with respect to the reference video signal. Use a
cross-point (Phillips) screwdriver to turn it.
2 SC (subcarrier) PHASE control
Turn this control to accurately adjust the subcarrier
phase of the composite video output signal of the unit
with respect to the reference video signal. Use a cross-
point (Phillips) screwdriver to turn it.
3 MENU button
Press this button to display the menu on the monitor
screen and the time counter display. Press it again to
return from the menu display to the usual display.
On how to use the menu, see Chapter 4 "Menu Settings".
4 Arrow (˘ ≥ ¿ ÷) buttons
Use these buttons to move around the menu items, and
also for setting time code and user bit data.
3 MENU button
4 Arrow buttons
MENU
TC PRESET
CH-
2/4
7 TC PRESET button
To expose the menu control panel
Press on the
top of the door.
5 RESET (NO) button
RESET(NO)
SET(YES)
6 SET (YES) button
For details on setting time code and user bit data, see
"Using the Internal Time Code Generator" (page 33).
5 RESET (NO) button
Press this button to:
• reset menu settings,
• reset the time data shown in the time counter display
to zero, or
• send a negative response to the unit's prompts.
6 SET (YES) button
Press this button to:
• save new settings, such as selected menu items and
time code settings, to the unit's memory, or
• send a positive response to the unit's prompts.
7 TC (time code) PRESET button
Use this button when setting time code's initial values
and user bit data.
For details on setting time code and user bit data, see
"Using the Internal Time Code Generator" (page 33).
PUSH OPEN
Chapter 1 Overview
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvcam dsr-85Dvcam dsr-85p

Table of Contents