Displaying Supplementary Status Information - Sony 85P Operating Instructions Manual

Displaying Supplementary Status Information

When you set "SUB STATUS" under the DISPLAY
CONTROL menu item to other than "OFF", you can
view supplementary status information on the monitor
screen below the operating mode display area.
T C R 0 0 : 0 4
P L A Y
I N S V
Supplementary status information
The following items of supplementary status
information are displayed depending on the setting of
"SUB STATUS".
Setting of "SUB Items of supplementary
STATUS" information displayed
EDIT PRESET Editing mode settings made on the
editing controller
PB FORMAT Recording format of the tape being
played back
TC MODE Operating mode of the internal time
code generator
ALL All of the above items
The following tables show the on-screen indications of
supplementary information and their meaning.
In each table, the indications given in brackets such as
[ASM] are the indications displayed when "SUB
STATUS" is set to "ALL". (For the display format
when "ALL" is selected, see the next paragraph.)
When "SUB STATUS" is set to "EDIT PRESET":
On-screen Meaning
indication
ASM [ASM] Assemble editing mode
INS V A1234 TC INS: Insert editing mode
[V1234T] V A1234 TC: Channel or signal
selected for insert editing
V: Video
A1234: Audio 1, 2, 3, 4
TC: Time code
When "SUB STATUS" is set to "PB FORMAT":
On-screen Meaning
indication
DVCAM [DC] DVCAM format
DV [D] DV format (SP mode)
DV(LP) [D] DV format (LP mode)
. 4 7 . 0 7
L O C K
A 1 2 3 4 T C
When "SUB STATUS" is set to "TC MODE":
On-screen Meaning
indication
INT PRESET The internal time code generator is
FREE [IP F] operating in FREE RUN mode.
INT PRESET REC The internal time code generator is
[IP R] operating in REC RUN mode.
EXT LTC-T&U The internal time code generator is in
[ELTU] synchronization with external time
code (LTC) input to the unit via
optional DSBK-130/130P board and is
generating the same time code value
and user bit value as those of the
external time code.
EXT QSDI-T&U The internal time code generator is in
[EQTU] synchronization with external time
code input to the unit via QSDI
interface and is generating the same
time code value and user bit value as
those of the external time code.
Display format of supplementary status
information when "SUB STATUS" is set to
"ALL"
All items of supplementary status information are
displayed in the order shown below.
(Example)
V 1 2 3 4 T
Editing mode settings made
on the editing controller
Recording format of the
tape being played back
D C I P F
Operating mode of the
internal time code generator
Chapter 4 Menu Settings
55