Table of Contents
Advertisement
Program and activate
a new external
diversion address
Cancel external
diversion
Re-activate external
diversion
BusinessPhone 250 / BusinessPhone 50
Portable DT310 / DT360 / DT368
To set a new individual external diversion address:
Dial
Dial the digit(s) for external call access and enter
the new external diversion address
A maximum of 24 digits.
Press to activate the individual diversion
Verification tone.
Note: Individual external diversion can also be used via the
DISA function, see section "Other useful facilities".
Dial
Note: The programmed diversion address is not removed from
the memory, the diversion is just inactive.
Divert your calls to an external position.
Dial to activate the programmed external diversion
You can make outgoing calls as usual. A special dial tone
reminds you that "Call forwarding" is active. On the DT368
display the activated external diversion is shown.
CALL FORWARDING
31
Advertisement
Table of Contents
