Main Gas Filter (Thermolazer 300Tc/Promelt); Screed Burner Filter - Graco ThermoLazer 200TC Repair Manual

Main Gas Filter (ThermoLazer 300TC/ProMelt)

Main Gas Filter
(ThermoLazer 300
TC
Removal
1. Unscrew filter fitting (403) from tee (12).
2. Unscrew fitting (407) from hose (99).
Install
1. Apply pipe sealant to 1/4 in. NPT of hose (99) and
screw on filter fitting (407).
2. Apply pipe sealant to 1/4 in. NPT of filter fitting (403)
and screw into tee (12).
3. Check gas lines for leaks. (See Operation Manual).
403
12
407
34
/ProMelt)
99
ti21960a

Screed Burner Filter

Removal
1. See Screed Burner Removal, page 32.
Install
1. See Screed Burner Install, page 32.
3A1320L