Table of Contents
Advertisement
Repair
Service Built-in Filter
Select models have a built-in filter in the lower housing.
Disassembly
To remove and clean the built-in filter:
1. Follow the Pressure Relief Procedure detailed in
your sprayer manual,
2. Use wrench to loosen and remove top filter cap
(20).
20
3. Remove o-ring (59*), strainer (23), and filter support
(24).
59*
23
14
Related Manuals, page 2.
TI8292a
24
TI8293a
4. Use wrench to loosen and remove bottom filter cap
(26). Remove o-rings (22*, 25*).
5. Replace o-rings (22*, 25*), strainer (23), and filter
support (24).
NOTE: O-rings take a set at high pressures. Always
replace the o-rings once the filter caps have been
removed.
6. Remove pipe plug (49), and use brush or drill to
clean port as necessary.
22*
25*
26
TI8463a
TI8747a
311762ZAP
Advertisement
Table of Contents
