CHAPTER 2. HARDWARE (66/110-Type)
Tools
The following tools are used to terminate or remove the wire on the
connecting blocks:
The 714B tool is a nonimpact single-wire termination tool
The D impact tool (AT-8762) is a single-wire impact termination
tool
The 724A tool is used to remove wires from the connecting
blocks.
66-TYPE TOOLS ORDERING INFORMATION
714B Tool
Blade AT-8762
D Impact Tool
724A Tool
Bridging Clips
Bridging clips are spring clips that connect two adjacent terminals in the
same terminal row on a connecting block. Bridging clips provide the
fastest, most reliable way to make cross-connections. No special tools
are required to install or remove the clips.
BRIDGING CLIPS ORDERING INFORMATION
BCSS-2 Bridging Clip 403 596 035
2-30
Description
Description
Comcode
100 755 511
402 024 681
402 024 723
100 755 636
Comcode