Defining Scopia ® Xt Desktop Server Public Address And Other Client Connection Settings - Avaya Scopia XT Installation Manual

Defining Scopia
Defining Scopia
Other Client Connection Settings
About this task
This section details how to define the public address of the Scopia
®
pushed to Scopia
You can also define Scopia
Maximum Transmission Unit, is the maximum size of data packets sent around your network.
Procedure
1. Access the Scopia
2. Select the Client icon in the sidebar.
3. Select the Settings tab.
4. Insert the public address of the Scopia
Use a FQDN which Scopia
the correct IP address of the server.
If a DNS name is not specified in the Public Address field, the Scopia
network interface address is used.
Figure 19: The public address for Scopia
5. Define the MTU Size if your network routers and the XT Series are configured to accept
network packets of a different size. The default value is 1360.
Important:
This value must remain the same across all network components to guard against
packet fragmentation.
6. Select OK or Apply.
August 2015
® XT Desktop server Public Address and Other Client Connection Settings
®
XT Desktop server Public Address and
XT Desktop Clients participating in a videoconference on that server.
®
XT Desktop server's size of network packets (MTU size). The MTU, or
®
XT Desktop server Administration web interface.
®
XT Desktop Clients can resolve from their location, to arrive at
Figure 20: Setting the MTU size for Scopia
Comments on this document? infodev@avaya.com
®
XT Desktop server, which is
®
XT Desktop server to be accessed by the client.
xtdesktop.avaya.com
®
XT Desktop Clients to connect to the server
®
XT Desktop Client
®
Avaya Scopia XT Desktop Server Installation Guide
®
XT Desktop server
31