Technical Information - Linksys SPA2102-R3 User Manual

Technical Information

Hardware Requirements
To use Digital Voice Global, you need to have the following items:
• Integrated access device (IAD)
Digital Voice Global currently supports the Linksys SPA2102-R3 IAD.
Linksys SPA2102-R3 IAD is compatible with almost any Microsoft Windows
with a 10Base-T or 10/100Base-T Ethernet adapter
Note: Only IAD purchased from StarHub or its authorised resellers can be used for Digital Voice Global.
• Broadband Internet connection
The broadband Internet access can either be of a cable (StarHubs' MaxOnline broadband access) or an
ADSL connection, with a minimum download speeds of 512Kbps and upload speeds of 256kbps.
Note: Digital Voice Global will not function with a narrowband connection. (e.g 56Kbps Dial-up access)
• Analogue phone (corded or cordless)
Internal Wiring
If the telephone set is connected directly to the voice port of the IAD, no additional wiring is required. Internal
wiring would be required should you wish to locate the telephone set in another room. We recommend using
a cordless phone if you do not wish to install internal wiring.
If you require additional wiring, please call our Customer Care at 1633 so that they can advise you on the
appropriate type of wiring for the service. We will be happy to arrange for additional cabling for you or you
may also wish to enage your own contractors for the job. Please ensure that only approved cables are used
for your cabling.
, Macintosh , or UNIX computers
® ® ®
3