Linksys Wireless-G WAG200G Quick Installation Manual
  1. Manuals
  2. Brands
  3. Linksys Manuals
  4. Gateway
  5. WAG200G
  6. Quick installation manual

Linksys Wireless-G WAG200G Quick Installation Manual

Adsl home gateway
Hide thumbs Also See for Wireless-G WAG200G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
4 ,
2
GHz
802.11g
Wireless
Wireless
Model No.
WAG200G (EU)
Model No.
Model No.
Package Contents
• Wireless-G ADSL Home Gateway
• User Guide on CD-ROM
• Ethernet Network Cable
• Phone Cable
• Power Adapter
• Microfilter or splitter (not supplied with
all models)
• Quick Installation
Wireless-G
ADSL Home Gateway
Quick Installation Guide
Quick Installation Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Linksys Wireless-G WAG200G

Summary of Contents for Linksys Wireless-G WAG200G

  • Page 1 Package Contents • Wireless-G ADSL Home Gateway • User Guide on CD-ROM • Ethernet Network Cable • Phone Cable • Power Adapter • Microfilter or splitter (not supplied with all models) • Quick Installation Wireless-G 802.11g ADSL Home Gateway Quick Installation Guide Quick Installation Guide Wireless Wireless...
  • Page 2 Connect the ADSL Home Gateway In Step 1, you will connect the Gateway to your ADSL line and to the computers in your home or business. First, make sure that all the devices that you’ll be working with are powered down, including your PCs and the Gateway.
  • Page 3 Repeat this process for every PC that you want to connect to the Gateway. If you are connecting more than four PCs to the Gateway, you will also need to connect a hub or switch to the Gateway. NOTE: If your PC’s Ethernet adapter is not set up, refer to the Ethernet adapter’s user guide for...
  • Page 4 Configure the ADSL Home Gateway In Step 2, you will configure your Linksys Wireless-G ADSL Home Gateway to be able to gain access to the Internet through your Internet Service Provider (ISP). You will need the setup information provided by your ADSL ISP .
  • Page 5 in lowercase letters in the Password field (admin is the default user name and password.) Then, click the OK button. The Basic Setup screen will appear with the Setup tab selected. (Figure C) Based on the setup instructions from your ISP , you may need to provide the following information.
  • Page 6 1 RFC 1483 Bridged Dynamic IP Address If your ISP says that you are connecting through a dynamic IP address (Figure D1), perform these steps: Select RFC 1483 Bridged for the Encapsulation. Dynamic Select Obtain an IP Address Automatically for the IP Set- ting.
  • Page 7 Enter the DNS in the Primary and/or Secondary fields. You need to enter at least one DNS address. Click the Save Settings button to save the settings. 2 RFC 2516 PPPoE or RFC 2364 PPPoA If your ISP says that you are connecting through PPPoE (Figure D3) or PPPoA (Figure D4), or if you normally enter a user name and...
  • Page 8 Troubleshooting section of the http://www.linksys.com/international User Guide. Product Registration http://www.linksys.com/registration Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. WAG200G-EU-QIG-60311NC TE...
  • Page 9 Pakkens indhold • Trådløs-G ADSL-gateway til hjemmet • Brugervejledning på cd-rom • Ethernet-kabel • Telefonledning • Strømforsyning • Mikrofilter eller fordeler (følger ikke med alle modeller) • Installationsvejledning Trådløs-G 802.11g ADSL-gateway til hjemmet Installationsvejledning Installationsvejledning Trådløs Wireless Modelnr. WAG200G (DK) Modelnr.
  • Page 10 Tilslutning af ADSL-gatewayen I trin 1 tilslutter du gatewayen til ADSL-linjen og til computerne i dit hjem/din virksomhed. Kontroller først, at alle de involverede enheder er slukket, herunder dine pc'er og gatewayen. Tilslut den ene ende af den medfølgende telefonledning til ADSL-vægstikket.
  • Page 11 Hvis du tilslutter mere end fire pc'er til gatewayen, skal du også tilslutte en hub eller switch til gatewayen. BEMÆRK: Hvis pc'ens Ethernet- adapter ikke er konfigureret, skal du se brugervejledningen til Ethernet-adapteren for at få yderligere oplysninger. Tilslut strømforsyningen til gatewayen.
  • Page 12 Konfiguration af ADSL-gatewayen I trin 2 konfigurerer du Linksys Trådløs-G ADSL-gatewayen, så du kan oprette adgang til internettet via din internetudbyder. Du skal have konfigurationsoplysningerne af din ADSL-udbyder. Hvis du ikke har disse oplysninger, skal du kontakte udbyderen, før du fortsætter.
  • Page 13 admin med små bogstaver i feltet Password (Adgangskode) (admin er standardbrugernavnet og -adgangskoden.) Klik derefter på knappen OK. Skærmbilledet Basic Setup vises med fanen Setup valgt. (Figur C) Afhængigt af konfigurationsvejledningen fra din internetudbyder skal du muligvis angive følgende oplysninger. VPI og VCI (Virtual Circuit): Disse felter består af to punkter: VPI (Virtual Path Identifier) og VCI...
  • Page 14 1 RFC 1483 Bridged Dynamisk IP-adresse Hvis din internetudbyder har oplyst, at du opretter forbindelse via en dynamisk IP-adresse (Figur D1), skal du følge nedenstående fremgangsmåde: Vælg RFC 1483 Bridged som indkapslingsmetode. Dynamisk Vælg Obtain an IP Address Automatically som IP-indstilling. Hurtig installation Klik på...
  • Page 15 Indtast DNS-adressen i feltet Primary og/eller Secondary. Du skal indtaste mindst én DNS-adresse. Klik på knappen Save Settings for at gemme indstillingerne. 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Hvis din internetudbyder har oplyst, at du opretter forbindelse via PPPoE (Figur D3) eller PPPoA (Figur D4), eller hvis du normalt indtaster et brugernavn og en adgangskode for at oprette...
  • Page 16 /international brugervejledningen. Registrering http://www.linksys.com/registration Linksys er et registreret varemærke tilhørende Cisco Systems, Inc. og/eller Cisco Systems associerede selskaber i USA og visse andre andre lande. Copyright © 2006 Cisco Systems, Inc. Alle rettigheder forbeholdes.
  • Page 17 Lieferumfang • Wireless-G ADSL-Home-Gateway • Benutzerhandbuch auf CD-ROM • Ethernet-Netzwerkkabel • Telefonkabel • Netzteil • Mikrofilter (nicht im Lieferumfang aller Modellnummern enthalten) • Kurzanleitung Wireless-G 802.11g ADSL-Home-Gateway Quick Installation Guide Kurzanleitung Wireless Wireless Model No. WAG200G (DE) Model No. Modell...
  • Page 18 Anschließen des ADSL-Gateways In Schritt 1 schließen Sie das Gateway an Ihre ADSL-Verbindung und die Computer in Ihrer Heim- oder Unternehmensumgebung an. Überprüfen Sie zuerst, ob alle Geräte, mit denen Sie arbeiten (einschließlich PCs und Gateway), ausgeschaltet sind. Schließen Sie ein Ende des beigelegten Telefonkabels an die Wandbuchse mit dem ADSL- Dienst an.
  • Page 19 Wenn mehr als vier PCs an das Gateway angeschlossen werden sollen, müssen Sie außerdem einen Hub oder Switch an das Gateway anschließen. HINWEIS: Wenn der Ethernet- Adapter des Computers nicht eingerichtet ist, finden Sie dazu weitere Informationen im Benutzerhandbuch zum Ethernet-Adapter.
  • Page 20 Konfigurieren des ADSL-Gateways In Schritt 2 konfigurieren Sie das Linksys Wireless-G ADSL-Home-Gateway für den Zugriff auf das Internet über Ihren ISP . Sie benötigen hierzu die Setup- Informationen Ihres ADSL-ISPs. Wenn Sie nicht über diese Informationen verfügen, wenden Sie sich an Ihren ISP , bevor Sie beginnen.
  • Page 21 Das Fenster Basic Setup (Grundlegende Einrichtung) wird mit ausgewählter Registerkarte Setup angezeigt (Abbildung C). Je nach den Setup-Informationen von Ihrem ISP müssen Sie unter Umständen die folgenden Informationen eingeben: Virtual Circuit (Virtueller Kreis): Für diese Option sind zwei Einstellungen erforderlich, VPI (Virtual Path Identifier;...
  • Page 22 1 RFC 1483 Bridged (RFC 1483- Überbrückung) Dynamische IP Adresse Wenn Sie laut ISP über eine dynamische IP- Adresse verbunden sind (Abbildung D1), führen Sie die folgenden Schritte aus: Wählen Sie als Kapselungsmethode RFC 1483 Bridged (RFC 1483- Überbrückung) aus. Dynamische IP-Adresse Wählen Sie Obtain an IP Address Automatically (IP-Adresse...
  • Page 23 Geben Sie die DNS-Adressen in die Felder Primary DNS (Primärer DNS) und Secondary DNS (Sekundärer DNS) ein. Sie müssen mindestens eine DNS-Adresse eingeben. Klicken Sie auf die Schaltfläche Save Settings (Einstellungen speichern), um die Einstellungen zu speichern. 2 RFC 2516 PPPoE oder RFC 2364 PPPoA Wenn Sie laut ISP über PPPoE (Abbildung D3) oder PPPoA (Abbildung D4) eine...
  • Page 24 Website zur Fehlerbehebung im http://www.linksys.com/international Benutzerhandbuch. Registrierung http://www.linksys.com/registration Linksys ist eine eingetragene Marke bzw. eine Marke von Cisco Systems, Inc. und/oder deren Zweigunternehmen in den USA und anderen Ländern. Copyright © 2006 Cisco Systems, Inc. Alle Rechte vorbehalten. WAG200G-DE-QIG-60314NC TE...
  • Page 25 Contenido del paquete • Puerta de enlace doméstica ADSL Wireless-G • Guía del usuario en CD-ROM • Cable de red Ethernet • Cable telefónico • Adaptador de corriente • Microfiltro(s) (no proporcionados con todos los números de modelo) • Instalación rápida Wireless-G 802.11g Puerta de enlace...
  • Page 26 Conecte la puerta de enlace ADSL En el paso 1, debe conectar la puerta de enlace a la línea ADSL y a los ordenadores de casa o de la oficina. En primer lugar, asegúrese de que todos los dispositivos con los que va a trabajar están apagados, incluyendo los PC y la puerta de enlace.
  • Page 27 Si va a conectar más de cuatro PC a la puerta de enlace, también deberá conectar un concentrador o conmutador a la misma. NOTA: Si el adaptador Ethernet del ordenador no está configurado, consulte la guía del usuario del mismo para obtener más información.
  • Page 28 Configure la puerta de enlace ADSL En el paso 2, debe configurar la puerta de enlace doméstica ADSL Wireless-G de Linksys para poder acceder a Internet mediante un proveedor de servicios de Internet (ISP). Necesitará la información proporcionada por el ISP de ADSL. Si no la tiene, póngase en contacto con...
  • Page 29 Nombre de usuario y de nuevo en el campo Contraseña (admin es el nombre de usuario y la contraseña predeterminados). A continuación, haga clic en el botón Aceptar. Aparece la pantalla Basic Setup (Configuración básica) con la ficha Setup (Configurar) seleccionada.
  • Page 30 1 RFC 1483 Bridged (RFC 1483 con puente) Dynamic IP Address (Dirección IP dinámica) Si el ISP indica que su conexión se realiza mediante una dirección IP dinámica (figura D1), siga estos pasos: En Encapsulation (Encapsulación), seleccione RFC 1483 Bridged (RFC 1483 con puente).
  • Page 31 Introduzca la dirección de la puerta de enlace predeterminada (Default Gateway). Introduzca la dirección DNS en los campos correspondientes a las direcciones DNS principal (Primary) y secundaria (Secondary). Debe introducir por lo menos una dirección DNS. Haga clic en el botón Save Settings (Guardar parámetros) para guardar los parámetros.
  • Page 32 Web, quizá le interese revisar las secciones de instalación y configuración de Linksys es una marca comercial registrada o marca esta guía de instalación rápida o comercial de Cisco Systems, Inc. y/o sus filiales de EE.UU. y otros países. Copyright © 2006 Cisco consultar la sección...
  • Page 33 Contenu de l'emballage • Modem routeur ADSL résidentiel sans fil G • Guide de l'utilisateur sur CD-ROM • Câble réseau Ethernet • Câble téléphonique • Adaptateur d'alimentation • Microfiltre(s) (ne sont pas livrés avec cer- tains modèles) • Guide d'installation rapide Sans fil-G 802.11g...
  • Page 34 Connexion du modem routeur ADSL L'étape 1 consiste à connecter le modem routeur à votre ligne ADSL ainsi qu'aux ordinateurs installés à domicile ou sur votre lieu de travail. Assurez-vous d'abord de la mise hors tension de tous les périphériques que vous allez utiliser, ordinateurs et passerelle inclus.
  • Page 35 Si vous raccordez plus de quatre ordinateurs au modem routeur, vous devrez également raccorder un concentrateur ou un commutateur au modem routeur. REMARQUE : Si la carte Ethernet de votre ordinateur n'est pas configurée, reportez-vous au guide de l'utilisateur de cette carte pour plus d'informations.
  • Page 36 Configuration du modem routeur ADSL A l'étape 2, vous configurerez votre modem routeur ADSL sans fil G Linksys afin qu'il puisse accéder à l'Internet par l'intermédiaire de votre Fournisseur d'accès Internet (FAI). Vous devrez avoir à votre disposition les informations de configuration fournies par votre FAI.
  • Page 37 User Name (Nom d'utilisateur) puis admin en minuscules Password (Mot dans le champ de passe) (admin correspond aux nom d'utilisateur et mot de passe par défaut). Cliquez sur le bouton OK. Basic Setup L'écran (Configuration de base) apparaîtra en affichant son onglet Setup (Configuration).
  • Page 38 1 RFC 1483 Bridged Adresse IP dynamique Si votre FAI vous indique que vous vous connectez par l'intermédiaire d'une adresse IP dynamique (Figure D1), exécutez la procédure ci-après : Sélectionnez RFC 1483 Bridged pour l'encapsulation. Sélectionnez Obtain an IP Dynamique Address Automatically (Obtenir automatiquement une adresse IP) pour définir...
  • Page 39 secondaire) . Vous devez entrer au moins une adresse DNS. Cliquez sur le bouton Save Settings (Enregistrer paramètres) pour enregistrer les modifications apportées aux paramètres. 2 RFC 2516 PPPoE ou RFC 2364 PPPoA Si votre FAI vous indique que vous vous connectez par le biais du protocole PPPoE (Figure D3) ou PPPoA (Figure D4) ou si vous devez...
  • Page 40 Guide d'installation rapide consacrés à l'installation et à la Linksys est une marque déposée ou une marque configuration du modem commerciale de Cisco Systems, Inc. et/ou ses routeur ou de consulter le filiales aux États-Unis et dans certains autres pays.
  • Page 41 Contenuto della confezione • Home Gateway ADSL Wireless-G • User Guide (Guida per l'utente) su CD-ROM • Cavo di rete Ethernet • Cavo telefonico • Adattatore di corrente • Microfiltri (non forniti con tutti i numeri di modello) • Guida di installazione rapida Wireless-G 802.11g Home Gateway ADSL...
  • Page 42 Collegamento del gateway ADSL Nella fase 1 il gateway viene collegato alla linea ADSL e ai computer di casa o dell'ufficio. Per prima cosa, verificare che tutti i dispositivi da utilizzare siano spenti, compresi i PC e il gateway. Collegare un'estremità del cavo telefonico alla presa a muro per il servizio ADSL.
  • Page 43 Se si collegano più di quattro PC al gateway, occorre collegare anche un hub o uno switch al gateway. NOTA Se l'adattatore Ethernet del PC non è configurato, consultare la relativa documentazione per istruzioni. Collegare l'adattatore di corrente al gateway. Collegare l'adattatore di corrente a una presa elettrica (Figura D).
  • Page 44 Configurazione del gateway ADSL Nella fase 2 viene configurato il Home Gateway ADSL Wireless-G di Linksys in modo che sia in grado di accedere a Internet attraverso il provider di servizi in uso. È necessario disporre delle informazioni sulla configurazione fornite dal provider di servizi Internet ADSL.
  • Page 45 Name (Nome utente) e Password (admin È il nome utente e la password predefinita). Quindi, fare clic sul pulsante OK. Viene visualizzata la schermata Basic Setup (Configurazione di base) in cui è selezionata la scheda Setup (Configurazione) (Figura C). In base alle istruzioni fornite dal provider di servizi Internet, è...
  • Page 46 1 RFC 1483 Bridged (Bridging RFC 1483) Indirizzo IP dinamico Se il provider di servizi Internet fornisce una connessione tramite un indirizzo IP dinamico (Figura D1), attenersi alla seguente procedura: Selezionare RFC 1483 Bridged (Bridging RFC 1483) per l'incapsulamento. Dinamico Selezionare Obtain an IP Address Automatically (Ottieni automaticamente un indirizzo IP)
  • Page 47 Immettere gli indirizzi DNS nei campi Primary DNS (DNS primario) e Secondary DNS (DNS secondario). È necessario specificare almeno un indirizzo DNS. Fare clic sul pulsante Save Settings (Salva impostazioni) per salvare le impostazioni. 2 RFC 2516 PPPoE o RFC 2364 PPPoA Se il provider di servizi Internet fornisce una connessione tramite PPPoE (Figura...
  • Page 48 Linksys è un marchio registrato o un marchio di presente Guida di installazione Cisco Systems, Inc. e/o dei relativi affiliati negli Stati Uniti e in altri paesi. Copyright © 2006 Cisco rapida o consultare la sezione Systems, Inc.
  • Page 49 Conteúdo da embalagem • Gateway ADSL doméstico sem fios G • Manual do Utilizador em CD-ROM • Cabo de rede Ethernet • Cabo telefónico • Transformador • Microfiltro(s) (não fornecido(s) com todos os números de modelos) • Manual de Instalação Rápida fios-G 802.11g Gateway ADSL doméstico...
  • Page 50 Ligar o Gateway ADSL No Passo 1, ligará o Gateway à linha ADSL e aos computadores em casa ou na empresa. Primeiro, certifique-se de que todos os dispositivos com que irá trabalhar estão desligados, incluindo os computadores e o Gateway. Ligue uma das extremidades do cabo telefónico fornecido à...
  • Page 51 Se estiver a ligar mais de quatro computadores ao Gateway, também será necessário ligar um concentrador ou comutador ao Gateway. NOTA: Se a placa Ethernet do computador não estiver configurada, consulte o manual do utilizador da placa Ethernet para obter mais informações.
  • Page 52 Configurar o Gateway ADSL No Passo 2, configurará o Gateway ADSL doméstico sem fios G da Linksys para conseguir aceder à Internet através do Fornecedor de serviços Internet (ISP). Necessitará das informações de configuração fornecidas pelo ISP do serviço de ADSL.
  • Page 53 em minúsculas no campo User Name (Nome de utilizador) e introduza admin em minúsculas no campo Password (Palavra-passe) (admin é o nome de utilizador e palavra-passe predefinidos). Em seguida, clique no botão OK. Será apresentado o ecrã Basic Setup (Configuração básica) com o separador Setup (Configurar) seleccionado.
  • Page 54 1 RFC 1483 Bridged Endereço IP dinâmico Se o ISP indicar que está a estabelecer ligação através de um endereço IP dinâmico (Figura D1), execute os seguintes passos: Seleccione RFC 1483 Bridged como Encapsulation (Encapsulamento). Dinâmico Instalação rápida Seleccione Obtain an IP Address Automatically (Obter automaticamente um endereço IP) em IP Setting...
  • Page 55 Introduza o Default Gateway address (Endereço predefinido do gateway). Introduza o DNS nos campos Primary (Primário) e/ou Secondary (Secundário). É necessário introduzir pelo menos um endereço de DNS. Clique no botão Save Settings (Guardar definições) para guardar as definições. 2 RFC 2516 PPPoE ou RFC 2364 PPPoA Se o ISP indicar que está...
  • Page 56 Web site, consulte as secções de instalação e configuração Linksys é uma marca registada ou marca comercial da Cisco Systems, Inc. e/ou das neste Manual de Instalação respectivas filiais nos E.U.A. e noutros países. Rápida ou consulte a secção Copyright ©...
  • Page 57 Innehåll i förpackningen • Wireless-G ADSL-gateway för hemmet • Användarhandbok på cd-skiva • Ethernet-nätverkskabel • Telefonkabel • Strömadapter • Mikrofilter eller signaldelare (medföljer inte alla modeller) • Snabbinstallation Wireless-G 802.11g ADSL-gateway för hemmet Snabbinstallationshandbo Snabbinstallationshandbok Wireless Modell nr WAG200G (SE) Modell nr Modellnr...
  • Page 58 Ansluta ADSL-gatewayen I steg 1 ansluter du gatewayen till ADSL-linjen och till datorerna hemma eller på jobbet. Börja med att kontrollera att alla aktuella enheter är avstängda, inklusive dator och gateway. Anslut den ena änden av medföljande telefonkabel till det vägguttag där ADSL-tjänsten installerats.
  • Page 59 Om du ansluter fler än fyra datorer måste du också ansluta en hub eller switch till gatewayen. OBS! Om datorns Ethernet- adapter inte har konfigurerats finns mer information om hur du går tillväga i användarhandboken till Ethernet-adaptern. Anslut strömadaptern till gatewayen.
  • Page 60 Konfigurera ADSL-gatewayen I steg 2 konfigurerar du Linksys Wireless- G ADSL-gateway för hemmet så att du får åtkomst till Internet genom din Internet-leverantör. Du behöver inställningsinformationen från din ADSL-leverantör. Om du inte har tillgång till denna information bör du kontakta leverantören innan du fortsätter.
  • Page 61 Lösenord. (admin är det standardinställda användarnamnet och lösenordet.) Klicka på OK. Skärmen Basic Setup (Grundläggande inställningar) visas med fliken Setup (Inställningar) vald (bild C). Beroende på inställningsanvisningarna från Internet-leverantören kan du behöva uppge följande information: Virtual Circuit (VPI och VCI) (Virtuell krets): Dessa fält består av två...
  • Page 62 1 RFC 1483 Bridged (Bryggkopplad) Dynamisk IP-adress Om Internet-leverantören anger att du ska ansluta till Internet via en dynamisk IP-adress (bild D1) ska du följa dessa steg: Välj RFC 1483 Bridged (Bryggkopplad) vid Encapsulation (Inkapsling). Dynamisk Välj Obtain an IP Address Automatically (Hämta IP-adress automatiskt) vid IP Settings (IP-inställningar).
  • Page 63 Skriv DNS-adressen i fältet Primary (Primär) eller Secondary (Sekundär). Du måste ange minst en DNS-adress. Spara inställningarna genom att klicka på Save Settings (Spara inställningar). 2 RFC 2516 PPPoE eller RFC 2364 PPPoA Om Internet-leverantören anger att du ska ansluta till Internet via PPPoE (bild D3) eller PPPoA (bild D4), eller om du brukar skriva ett användarnamn eller lösenord för att komma åt Internet, ska...
  • Page 64 Webbplats http://www.linksys.com /international Registrering http://www.linksys.com/registration Linksys är ett registrerat varumärke eller ett varumärke som tillhör Cisco Systems, Inc. och/ eller dess samarbetspartner i USA och vissa andra länder. Copyright © 2006 Cisco Systems, Inc. Med ensamrätt. WAG200G-SE-QIG-60314NC TE...
  • Page 65 Wireless-G 802.11g User Guide ADSL Home Gateway WIRELESS WAG200G (EU Model No.
  • Page 66 Wireless-G ADSL Home Gateway Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved.

  • Page 67: Table Of Contents

    Wireless-G ADSL Home Gateway Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Network The Gateway’s Functions IP Addresses Chapter 3: Getting to Know the Wireless-G ADSL Home Gateway Ports and Reset Button on Side Panel LEDs on Side Panel Chapter 4: Connecting the Wireless-G ADSL Home Gateway Overview...
  • Page 68 Wireless-G ADSL Home Gateway Appendix D: Upgrading Firmware Appendix E: Glossary Appendix F: Specifications Appendix G: Warranty Information Appendix H: Regulatory Information Appendix I: Contact Information...
  • Page 69 Wireless-G ADSL Home Gateway List of Figures Figure 2-1: Network Figure 3-1: Ports and Reset Button on Side Panel Figure 3-2: LEDs on Side Panel Figure 4-1: Connect the ADSL Line Figure 4-2: Connect a PC Figure 4-3: Connect the Power Figure 4-4: Connect the ADSL Line Figure 4-5: Connect the Power Figure 5-1: Login Screen...
  • Page 70 Wireless-G ADSL Home Gateway Figure 5-25: List of PCs Figure 5-26: Add/Edit Service Figure 5-27: Single Port Forwarding Figure 5-28: Port Range Forwarding Figure 5-29: Port Triggering Figure 5-30: DMZ Figure 5-31: QoS Figure 5-32: Management Figure 5-33: Allowed IP - IP Range Figure 5-34: Reporting Figure 5-35: System Log Figure 5-36: Ping Test...

  • Page 71: Chapter 1: Introduction Welcome

    Linksys recommends using the Setup CD-ROM for first-time installation of the Gateway. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then use the instructions in this Guide to help you connect the Gateway, set it up, and configure it to bridge your different networks.

  • Page 72: What's In This User Guide

    Wireless-G ADSL Home Gateway What’s in this User Guide? This user guide covers the steps for setting up and using the Wireless-G ADSL Home Gateway. • Chapter 1: Introduction This chapter describes applications of the Wireless-G ADSL Home Gateway and this User Guide. •...
  • Page 73 • Appendix H: Regulatory Information This appendix supplies the regulatory information regarding the Gateway. • Appendix I: Contact Information This appendix provides contact information for a variety of Linksys resources, including Technical Support. Chapter 1: Introduction What’s in this User Guide?

  • Page 74: Chapter 2: Planning Your Network

    Wireless-G ADSL Home Gateway Chapter 2: Planning Your Network The Gateway’s Functions A Gateway is a network device that connects two networks together. In this instance, the Gateway connects your Local Area Network (LAN), or the group of computers in your home or office, to the Internet.
  • Page 75 Wireless-G ADSL Home Gateway Since you use the Gateway to share your DSL Internet connection, contact your ISP to find out if they have assigned a static IP address to your account. If so, you will need that static IP address when configuring the Gateway.

  • Page 76: Chapter 3: Getting To Know The Wireless-G Adsl Home Gateway

    Wireless-G ADSL Home Gateway Chapter 3: Getting to Know the Wireless-G ADSL Home Gateway Ports and Reset Button on Side Panel The Gateway’s ports and Reset button are located on a side panel. Figure 3-1: Ports and Reset Button on Side Panel Line The Line port connects to the ADSL line.

  • Page 77: Leds On Side Panel

    Wireless-G ADSL Home Gateway LEDs on Side Panel The Gateway's LEDs, which indicate network activity, are located on the other side panel. Figure 3-2: LEDs on Side Panel POWER Green. The POWER LED lights up when the Gateway is powered on. WIRELESS Green.

  • Page 78: Chapter 4: Connecting The Wireless-G Adsl Home Gateway

    Wireless-G ADSL Home Gateway Chapter 4: Connecting the Wireless-G ADSL Home Gateway Overview The installation technician from your ISP should have left the setup information for the modem with you after installing your broadband connection. If not, you can call your ISP to request that data. After you have the setup information you need for your specific type of Internet connection, you can begin installation and setup of the Gateway.

  • Page 79: Wired Connection To A Computer

    Wireless-G ADSL Home Gateway Wired Connection to a Computer 1. Make sure that all of your network’s hardware is powered off, including the Gateway and all computers. 2. Connect a phone cable from the Line port on the Gateway’s side panel to the wall jack of the ADSL line. A small device called a microfilter (not included) may be necessary between each phone and wall jack to prevent interference.

  • Page 80: Wireless Connection To A Computer

    5. For initial access to the Gateway through a wireless connection, make sure the computer’s wireless adapter has its SSID set to linksys (the Gateway’s default setting), and its wireless security is disabled. After you have Figure 4-5: Connect the Power accessed the Gateway, you can change the Gateway and this computer’s adapter settings to match your usual...

  • Page 81: Chapter 5: Configuring The Wireless-G Adsl Home Gateway

    Wireless-G ADSL Home Gateway Chapter 5: Configuring the Wireless-G ADSL Home Gateway Overview HAVE YOU: Enabled TCP/IP on your computers? Computers communicate over the network with this protocol. Refer to Windows Follow the steps in this chapter and use the Gateway’s web-based utility to configure the Gateway. This chapter Help for more information on TCP/IP.
  • Page 82 Wireless-G ADSL Home Gateway Security On this screen you can disable or enable the firewall, set up filters, block WAN requests, and enable or disable Virtual Private Networks (VPN) PassThrough. vpn (virtual private network): a security measure to protect data as it leaves one Access Restrictions network and goes to another over the Internet.

  • Page 83: How To Access The Web-Based Utility

    Wireless-G ADSL Home Gateway Status • Gateway. This screen provides status information about the Gateway. • Local Network. This provides status information about the local network. • Wireless. This screen provides status information about the wireless network. • DSL Connection. This screen provides status information about the DSL connection. Figure 5-1: Login Screen How to Access the Web-based Utility To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway’s default...

  • Page 84: Figure 5-3: Rfc 1483 Bridged - Dynamic Ip

    Wireless-G ADSL Home Gateway • Pcr Rate: For the Peak Cell Rate, divide the DSL line rate by 424 to get the maximum rate the sender can send cells. Enter the rate in the field (if required by your service provider). •...

  • Page 85: Figure 5-5: Rfc 1483 Routed

    Wireless-G ADSL Home Gateway RFC 1483 Routed If you are required to use RFC 1483 Routed, then select RFC 1483 Routed. • Internet IP Address. This is the Gateway’s IP address, when seen from the WAN, or the Internet. Your ISP will provide you with the IP Address you need to specify here.

  • Page 86: Figure 5-7: Rfc 2364 Pppoa

    Wireless-G ADSL Home Gateway RFC 2364 PPPoA Some DSL-based ISPs use PPPoA (Point-to-Point Protocol over ATM) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoA. If they do, you will have to enable PPPoA.

  • Page 87: Figure 5-9: Optional Settings

    Wireless-G ADSL Home Gateway • Local IP Address. The default value is 192.168.1.1. • Subnet Mask. The default value is 255.255.255.0. • Network Address Server Settings (DHCP). Configure the Gateway’s Dynamic Host Configuration Protocol (DHCP) settings in this section. • Local DHCP Server. A Dynamic Host Configuration Protocol (DHCP) server automatically assigns an IP address to each computer on your network for you.

  • Page 88: Figure 5-10: Dyndns.org

    Wireless-G ADSL Home Gateway The DDNS Tab The Gateway offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Gateway.

  • Page 89: Figure 5-12: Advanced Routing

    Wireless-G ADSL Home Gateway The Advanced Routing Tab The Advanced Routing screen allows you to configure the NAT, dynamic routing, and static routing settings. Advanced Routing • Operating Mode. In this section, you will configure the Gateway’s general routing settings. •...

  • Page 90: Figure 5-13: Routing Table

    Wireless-G ADSL Home Gateway • Select set number. Select the number of the static route from the drop-down menu. The Gateway supports up to 20 static route entries. If you need to delete a route, then select the entry and click the Delete This Entry button.

  • Page 91: The Wireless Tab

    It must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character. Linksys recommends that you change the default SSID (linksys) to a unique name of your choice.

  • Page 92: Figure 5-15: Wpa Personal

    Wireless-G ADSL Home Gateway The Wireless Security Tab The Wireless Security settings configure the security of your wireless network. There are two wireless security options supported by the Gateway: WPA Personal and WEP. (WPA stands for Wi-Fi Protected Access, which is a security standard stronger than WEP encryption.

  • Page 93: Figure 5-16: Wep

    WEP keys. It is case-sensitive and should not be longer than 32 alphanumeric characters. (This Passphrase function is compatible with Linksys wireless products only and cannot be used with Windows XP Zero Configuration. If you want to communicate with non-Linksys wireless products or Windows XP Zero Configuration, make a note of the WEP key generated in the Key 1 field, and enter it manually in the wireless computer or client.) After you enter the Passphrase, click the Generate button to...

  • Page 94: Figure 5-17: Wireless Network Access

    Wireless-G ADSL Home Gateway The Wireless Access Tab Wireless Network Access Wireless Network Access. Select Allow All you want all computers to have access to the wireless network. To restrict access to the network, select Restrict Access, and then select Prevent to block access for the designated computers or Permit only to permit access for the designated computers.

  • Page 95: Figure 5-20: Advanced Wireless Settings

    Wireless-G ADSL Home Gateway The Advanced Wireless Settings Tab Advanced Wireless On this screen you can access the advanced wireless features, including Authentication Type, Control TX Rate, Beacon Interval, DTIM Interval, Fragmentation Threshold, and RTS Threshold. • Authentication Type. The default is set to Auto, which allows either Open System or Shared Key authentication to be used.

  • Page 96: The Security Tab

    Wireless-G ADSL Home Gateway The Security Tab This screen shows the VPN passthrough, firewall, and filter settings. Use these features to enhance the security of your network. VPN Passthrough Virtual Private Networking (VPN) is a security measure that basically creates a secure connection between two remote locations.

  • Page 97: Figure 5-22: Firewall Log

    Wireless-G ADSL Home Gateway • Filter Java Applets. Java is a programming language for websites. If you deny Java Applets, you run the risk of not having access to Internet sites created using this programming language. To enable Java Applet filtering, click the checkbox.

  • Page 98: The Access Restrictions Tab

    Wireless-G ADSL Home Gateway The Access Restrictions Tab The Internet Access Tab The Internet Access screen allows you to block or allow specific kinds of Internet usage. You can set up Internet access policies for specific computers and block websites by URL address or keyword. Internet Access Policy.

  • Page 99: Figure 5-25: List Of Pcs

    Wireless-G ADSL Home Gateway 4. Click the Edit List of PCs button to select which PCs will be affected by the policy. The List of PCs screen will appear. You can select a PC by MAC Address or IP Address. You can also enter a range of IP Addresses if you want this policy to affect a group of PCs.

  • Page 100: The Applications And Gaming Tab

    Wireless-G ADSL Home Gateway The Applications and Gaming Tab The Single Port Forwarding Tab Single Port Forwarding Use the Single Port Forwarding screen when you want to open a specific port so users on the Internet can see the servers behind the Gateway (such servers may include FTP or e-mail servers). When users send this type of request to your network via the Internet, the Gateway will forward those requests to the appropriate computer.

  • Page 101: Figure 5-28: Port Range Forwarding

    Wireless-G ADSL Home Gateway The Port Range Forwarding Tab The Port Range Forwarding screen sets up public services on your network, such as web servers, ftp servers, e- mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming.

  • Page 102: Figure 5-29: Port Triggering

    Wireless-G ADSL Home Gateway The Port Triggering Tab Port Triggering is used for special applications that can request a port to be opened on demand. For this feature, the Gateway will watch outgoing data for specific port numbers. The Gateway will remember the IP address of the computer that sends a transmission requesting data, so that when the requested data returns through the Gateway, the data is pulled back to the proper computer by way of IP address and port mapping rules.

  • Page 103: Figure 5-30: Dmz

    Wireless-G ADSL Home Gateway The DMZ Tab The DMZ screen allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and videoconferencing through DMZ Hosting. DMZ hosting forwards all the ports for one computer at the same time, which differs from Port Range Forwarding, which can only forward a maximum of 10 ranges of ports.

  • Page 104: Figure 5-31: Qos

    Wireless-G ADSL Home Gateway The QoS Tab Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as Internet phone calls or videoconferencing. Enabled/Disabled. To use QoS, select Enable. Otherwise, keep the default, Disable. Application-based QoS Application-based QoS manages information as it is transmitted and received.

  • Page 105: The Administration Tab

    Wireless-G ADSL Home Gateway The Administration Tab The Management Tab The Management screen allows you to change the Gateway’s access settings as well as configure the SNMP (Simple Network Management Protocol), UPnP (Universal Plug and Play), IGMP (Internet Group Multicast Protocol)-Proxy, and WLAN management features.
  • Page 106 Wireless-G ADSL Home Gateway SNMP SNMP is a popular network monitoring and management protocol. To enable SNMP, click Enabled. To disable SNMP, click Disabled. If enabled, then specify the IP address(es) allowed to have SNMP access. Select All to allow all IP addresses with no restrictions, IP address to specify a single IP address, or IP range to specify a range of IP addresses.

  • Page 107: Figure 5-34: Reporting

    • Log. To enable log reporting, click Enabled. • Logviewer IP Address. Enter the IP Address of the computer that will receive logs. You will need Logviewer software to view these logs. This free software is available for download from www.linksys.com. Email Alerts Figure 5-34: Reporting •...

  • Page 108: Figure 5-36: Ping Test

    Wireless-G ADSL Home Gateway The Diagnostics Tab Ping Test Ping Test Parameters • Ping Target IP. Enter the IP address that you want to ping. This can be either a local (LAN) IP or an Internet (WAN) IP address. • Ping Size. Enter the size of the packet. •...

  • Page 109: Figure 5-38: Factory Defaults

    Upgrade from LAN Figure 5-38: Factory Defaults To upgrade the Gateway’s firmware from the LAN: 1. Download the Gateway’s firmware upgrade file from www.linksys.com. 1. Extract the file on your computer. 1. Click the Browse button to find the firmware upgrade file.

  • Page 110: Figure 5-40: Reboot

    Wireless-G ADSL Home Gateway The Reboot Tab This screen allows you to do a soft or hard reboot of the Gateway. In most cases you should use the hard reboot. The soft reboot is similar to restarting your computer without physically powering down the computer. Reboot Reboot Mode.

  • Page 111: The Status Tab

    Wireless-G ADSL Home Gateway The Status Tab The Gateway Tab This screen displays information about the Gateway and its Internet connection. Gateway Information This section displays the Gateway’s Firmware Version, MAC Address, and Current Time. Internet Connection This section shows the following information: the Connection, Login Type, Interface, IP Address, Subnet Mask, Default Gateway, DNS 1, 2, and 3 server IP addresses, and WINS address.

  • Page 112: Figure 5-42: Local Network

    Wireless-G ADSL Home Gateway The Local Network Tab The Local Network information that is displayed is the local Mac Address, IP Address, Subnet Mask, DHCP Server, Start IP Address, and End IP Address. To view the DHCP Clients Table, click the DHCP Clients Table button. To view the ARP/RARP Table, click the ARP/RARP Table button.

  • Page 113: Figure 5-45: Wireless

    Wireless-G ADSL Home Gateway The Wireless Tab The Wireless network information that is displayed is the Wireless Firmware Version, MAC Address, Mode, SSID, DHCP Server, Channel, and Encryption Function. Click the Wireless Clients Connected button to view a list of the wireless clients connected to the Gateway, along with their computer names, IP addresses, and MAC addresses.

  • Page 114: Figure 5-47: Dsl Connection

    Wireless-G ADSL Home Gateway The DSL Connection Tab This screen shows information about the DSL connection and the PVC connection. DSL Status This section shows the following: DSL Status, DSL Modulation Mode, DSL Path Mode, Downstream Rate, Upstream Rate, Downstream Margin, Upstream Margin, Downstream Line Attenuation, Upstream Line Attenuation, Downstream Transmit Power, and Upstream Transmit Power.

  • Page 115: Appendix A: Troubleshooting

    Provided are possible solutions to problems that may occur during the installation and operation of the Gateway. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys international website at www.linksys.com/international.
  • Page 116 Wireless-G ADSL Home Gateway 7. Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information. 8.
  • Page 117 Wireless-G ADSL Home Gateway For Windows 98 and Me: • Click Start and Run. In the Open field, type in command. Press the Enter key or click the OK button. For Windows NT, 2000, and XP: • Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key.
  • Page 118 Refer to “Problem #7, I need to set up online game hosting or use other Internet applications” for details. • Check the Linksys international website for more information at www.linksys.com/international. 6. I need to set up a server behind my Gateway and make it available to the public.
  • Page 119 Wireless-G ADSL Home Gateway field provided. Check “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. 6. Check the Enable option for the port services you want to use. Consider the example below: Customized Application External Port IP Address...
  • Page 120 Wireless-G ADSL Home Gateway 8. I can’t get the Internet game, server, or application to work. If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one computer to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an application requires too many ports or when you are not sure which port services to use.
  • Page 121 12. I need to upgrade the firmware. In order to upgrade the firmware with the latest features, you need to go to the Linksys international website and download the latest firmware at www.linksys.com/international. • Follow these steps: 1.
  • Page 122 Wireless-G ADSL Home Gateway 1. To connect to the Gateway, go to the web browser, and enter http://192.168.1.1 or the IP address of the Gateway. 2. Enter the username and password, if asked. (The default username and password is admin.) 3.

  • Page 123: Frequently Asked Questions

    Wireless-G ADSL Home Gateway • If the Gateway is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is working correctly. You can remove the Gateway to verify a direct connection. • Manually configure the TCP/IP settings with a DNS address provided by your ISP. •...
  • Page 124 Does the Gateway support any operating system other than Windows 98SE, Windows Millennium, Windows 2000, or Windows XP? Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems. Does the Gateway support ICQ send file? Yes, with the following fix: click ICQ menu ->...
  • Page 125 How will I be notified of new Gateway firmware upgrades? All Linksys firmware upgrades are posted on the Linksys international website at www.linksys.com/international, where they can be downloaded for free. To upgrade the Gateway’s firmware, use the Administration tab of the Gateway’s web-based utility.
  • Page 126 Wireless-G ADSL Home Gateway Is the Gateway cross-platform compatible? Any platform that supports Ethernet and TCP/IP is compatible with the Gateway. How many ports can be simultaneously forwarded? Theoretically, the Gateway can establish 520 sessions at the same time, but you can only forward 10 ranges of ports.
  • Page 127 Wireless-G ADSL Home Gateway What IEEE 802.11b and 802.11g features are supported? The product supports the following IEEE 802.11b and IEEE 802.11g functions: • CSMA/CA plus Acknowledge protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation •...
  • Page 128 Wireless-G ADSL Home Gateway What is the ISM band? The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide.
  • Page 129 There are eleven available channels, ranging from 1 to 11, in North America. There may be additional channels available in other regions, subject to the regulations of your region and/or country. If your questions are not addressed here, refer to the Linksys international website, www.linksys.com/international.

  • Page 130: Appendix B: Wireless Security

    Wireless-G ADSL Home Gateway Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation.
  • Page 131 This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory. (The Linksys default SSID is “linksys”.) Hackers know these defaults and can check these against your network. Change your SSID to something unique and not something related to your company or the networking products you use.
  • Page 132 These security recommendations should help keep your mind at ease while you are enjoying the most flexible and convenient technology Linksys has to offer. Appendix B: Wireless Security Security Threats Facing Wireless Networks...

  • Page 133: Appendix C: Finding The Mac Address And Ip Address For Your Ethernet Adapter

    Wireless-G ADSL Home Gateway Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering feature of the Gateway. You can also find the IP address of your computer’s Ethernet adapter. This IP address is used for the Gateway’s filtering, forwarding, and/or DMZ features.

  • Page 134: Windows 2000 Or Xp Instructions

    Wireless-G ADSL Home Gateway Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. Note: The MAC address is also called the Physical Address. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3.

  • Page 135: Appendix D: Upgrading Firmware

    Wireless-G ADSL Home Gateway Appendix D: Upgrading Firmware To upgrade the Gateway’s firmware: 1. Download the Gateway’s firmware upgrade file from www.linksys.com. 2. Extract the file on your computer. 3. Open the Gateway’s Web-based Utility and click the Administration tab.

  • Page 136: Appendix E: Glossary

    Wireless-G ADSL Home Gateway Appendix E: Glossary 802.11b - A wireless networking standard that specifies a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz. 802.11g - A wireless networking standard that specifies a maximum data transfer rate of 54Mbps, an operating frequency of 2.4GHz, and backward compatibility with 802.11b devices.
  • Page 137 Wireless-G ADSL Home Gateway Cable Modem - A device that connects a computer to the cable television network, which in turn connects to the Internet. CSMA/CA (Carrier Sense Multiple Access/Collision Avoidance) - A method of data transfer that is used to prevent data collisions.
  • Page 138 Wireless-G ADSL Home Gateway EAP (Extensible Authentication Protocol) - A general authentication protocol used to control network access. Many specific authentication methods work within this framework. EAP-PEAP (Extensible Authentication Protocol-Protected Extensible Authentication Protocol) - A mutual authentication method that uses a combination of digital certificates and another system, such as passwords. EAP-TLS (Extensible Authentication Protocol-Transport Layer Security) - A mutual authentication method that uses digital certificates.
  • Page 139 Packet - A unit of data sent over a network. Passphrase - Used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption keys for Linksys products. PEAP (Protected Extensible Authentication Protocol) - A mutual authentication method that uses a combination of digital certificates and another system, such as passwords.
  • Page 140 Wireless-G ADSL Home Gateway Ping (Packet INternet Groper) - An Internet utility used to determine whether a particular IP address is online. POP3 (Post Office Protocol 3) - A standard mail server commonly used on the Internet. Port - The connection point on a computer or networking device used for plugging in cables or adapters. Power over Ethernet (PoE) - A technology enabling an Ethernet network cable to deliver both data and power.
  • Page 141 Wireless-G ADSL Home Gateway Spread Spectrum - Wideband radio frequency technique used for more reliable and secure data transmission. SSID (Service Set IDentifier) - Your wireless network's name. Static IP Address - A fixed address assigned to a computer or device that is connected to a network. Static Routing - Forwarding data in a network via a fixed path.
  • Page 142 Wireless-G ADSL Home Gateway VPN (Virtual Private Network) - A security measure to protect data as it leaves one network and goes to another over the Internet. WAN (Wide Area Network)- The Internet. WEP (Wired Equivalent Privacy) - A method of encrypting network data transmitted on a wireless network for greater security.

  • Page 143: Appendix F: Specifications

    Wireless-G ADSL Home Gateway Appendix F: Specifications Model Number WAG354G Standards IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3, G.992.5, T1.413i2 Ports Power, ADSL, Ethernet (1-4) Button One Reset Button Cabling Type CAT 5 UTP LEDs Power, Wireless, Ethernet (1-4), DSL, Internet Transmit Power...
  • Page 144 Wireless-G ADSL Home Gateway Dimensions 140 mm x 140 mm x 27 mm (5,51" x 5,51" x 1,06") Unit Weight 0,3 kg (0,6 lb.) Power 12VDC 1A Certifications Operating Temp. 0º~40ºC (32º~104ºF) Storage Temp. -20º~70ºC (-4º~158ºF) Operating Humidity 10~85% Non-Condensing Storage Humidity 5~90% Non-Condensing Appendix F: Specifications...

  • Page 145: Appendix G: Warranty Information

    Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

  • Page 146: Appendix H: Regulatory Information

    Wireless-G ADSL Home Gateway Appendix H: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 147 Wireless-G ADSL Home Gateway Compliance Information for 2.4-GHz Wireless Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) Appendix H: Regulatory Information...
  • Page 148 • A pdf file is included on the product's CD. • A print copy is included with the product. • A pdf file is available on the product's webpage. Visit www.linksys.com/international and select your country or region. Then select your product.
  • Page 149 Wireless-G ADSL Home Gateway Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT).
  • Page 150 (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable.
  • Page 151 Adobe Acrobat installed on your computer. NOTE: If you have questions regarding the compliance of these products or you cannot find the information you need, please contact your local sales office or visit http://www.linksys.com/international for more details. Appendix H: Regulatory Information...
  • Page 152 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:...
  • Page 153 Wireless-G ADSL Home Gateway Appendix H: Regulatory Information...
  • Page 154 Wireless-G ADSL Home Gateway Appendix H: Regulatory Information...
  • Page 155 Wireless-G ADSL Home Gateway Appendix H: Regulatory Information...
  • Page 156 Wireless-G ADSL Home Gateway For more information, visit www.linksys.com. Appendix H: Regulatory Information...

  • Page 157: Appendix I: Contact Information

    Appendix I: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria support.at@linksys.com...
  • Page 158 E-mail Address Switzerland support.ch@linksys.com United Kingdom support.uk@linksys.com Outside of Europe E-mail Address Asia Pacific asiasupport@linksys.com (English only) Latin America support.portuguese@linksys.com or support.spanish@linksys.com Middle East & Africa support.mea@linksys.com (English only) South Africa support.ze@linksys.com (English only) support.ae@linksys.com (English only) U.S. and Canada support@linksys.com...

Table of Contents