Table of Contents
Advertisement
This chapter explains how to maintain and operate the machine.
Where to Put the Machine
The stacker's location should be carefully chosen because environmental condi-
tions greatly affect its performance.
Moving
Observe the following precautions when moving the machine.
R CAUTION:
• Contact your service representative if you need to lift the machine (such as
when relocating it to another floor). Do not attempt to lift the machine without
the assistance of your service representative. The machine will be damaged
if it topples or is dropped, resulting in malfunction and risk of injury to users.
The machine's various handling areas are for service engineer use only. Do
not touch these areas.
Optimum Environmental Conditions
Observe the following precautions when installing the machine.
R CAUTION:
• Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over,
an injury might occur.
R CAUTION:
• Make sure the room where you are using the machine is well ventilated and
spacious. Good ventilation is especially important when the machine is used
heavily.
• Temperature: 10 to 32 °C
• Humidity: 15 to 80 %
• A strong and level base
• The machine must be level within 5 mm (0.2 inch): both front to rear and left
to right.
4. Remarks
33
Advertisement
Table of Contents
