Specifying The Output Settings When Stacker Is Full; Specifying The Stacker Output Tray For The Customize Function - Savin SK5000 Operating Instructions Manual

Specifying the Output Settings When Stacker is Full

Specify the output settings when stacker is full. This can be selected when the
user selects [Auto Change] for [Output Tray Setting].
❖ Auto Detect
Output stops when all trays are full. After you unload the output tray, output
starts again to the empty tray.
❖ Priority Stacker
Output stops when all trays are full. Output to the empty tray begins again
when the tray in the specified order becomes empty.
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [General Features].
D
Press[TNext].
E
Press [Output Tray Setting].
F
In "Output Settings when Stacker is Full", select either [Auto Detect] or [Pri-
ority Stacker], and then press [OK].
G
Press [Exit] twice.

Specifying the Stacker Output Tray for the Customize Function

Specify which stacker output tray has priority to be shown on the initial display.
A
Press the {User Tools} key.
B
Press [Copier / Document Server Features].
C
Press [Input / Output].
D
Press [Fold Type / Stacker Output Tray].
E
Select the item that you want to change.
F
Select output tray as the item to be specified, and then press [OK].
G
Press [Exit] twice.
Output Tray Settings
17
1