Connecting And Using A Second Stacker - Savin SK5000 Operating Instructions Manual

Connecting and Using a Second Stacker

If you install a second stacker, paper collection can continue without interrup-
tion when the first stacker becomes full. While one stacker is collecting paper,
you can unload and reload the handcart of the other stacker.
Important
❒ To switch output trays automatically, "Output Tray" must be set to [Auto Change]
in [Output Tray Setting] under [System Settings].
❒ When a second stacker is installed and "Output Tray" is set to [Auto Change],
the output tray will change automatically in the following cases:
• Whenever the receiving stacker becomes full and the other stacker tray is
empty.
• If the settings of the receiving stacker are changed from the receiving main
control panel or a connected computer and the other stacker tray is empty.
• If "Multi-job Output Method to Stacker" is set to [Do not Stack Jobs] and the
other stacker tray is empty when a new job begins.
Note
❒ Even if "Output Tray" is set to [Auto Change], output stops if the other stacker
tray is not empty.
❒ If a paper jam occurs when a second stacker is installed, the Paper Jam button
of the stacker in which the paper jam occurred lights red.
Connecting and Using a Second Stacker
2
27