Preparation Before Using the Stacker
Specifying Output Trays According to Function
Before using the stacker, use the following procedure to specify an output tray
for each function.
1
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [General Features].
D
Select the output tray for each function, and then press [OK].
E
Press [Exit] twice.
Specifying Multi-Job Output Settings
Configure the machine to deliver multiple jobs to the stacker tray.
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [General Features].
D
Press[TNext].
E
Press [Output Tray Setting].
F
In "Multi-job Output Method to Stacker", select either [Stack Jobs] or [Do not
Stack Jobs], and then press [OK].
G
Press [Exit] twice.
16