Output Tray Settings; Specifying The Output Tray Setting - Savin SK5000 Operating Instructions Manual

Output Tray Settings

You can configure the stacker's output tray settings in User Tools.

Specifying the Output Tray Setting

Use the following procedure to specify either [According to Function Setting] or [Au-
to Change] as the output tray selection method.
❖ According to Function Setting
The output tray is auto selected according to the function in use. For details
about specifying output trays according to function, see "Specifying Output
Trays According to Function".
❖ Auto Change
Another tray will automatically take over when the first tray becomes full.
You can select this setting only if a second stacker is installed and if [Print Pri-
ority] is set to [Job Order].
A
Press the {User Tools} key.
B
Press [System Settings].
C
Press [General Features].
D
Press[TNext].
E
Press [Output Tray Setting].
F
In "Output Tray", select either [According to Function Setting] or [Auto Change],
and then press [OK].
G
Press [Exit] twice.
Reference
p.16 "Specifying Output Trays According to Function"
Output Tray Settings
15
1