Preparation Before Using The Stacker; Paper; Supported Paper Types And Sizes; Unsupported Paper Types - Savin SK5000 Operating Instructions Manual

1. Preparation Before Using

Paper

This section lists the paper types and sizes that are supported by the stacker, and
paper types that are not supported.

Supported Paper Types and Sizes

For details about supported paper type and sizes, see "Recommended Paper Siz-
es and Types", About This Machine.

Unsupported Paper Types

This section lists the paper types that are not supported by the stacker.
R CAUTION:
• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or a machine failure.
Important
❒ To prevent faults, do not use any of the following kinds of treated paper:
• Paper for inkjet printers
• Thermal fax paper
• Aluminum foil
• Carbon paper
• Conductive paper
• Paper with perforated lines
• Hemmed-edge paper
• Colour OHP transparencies with easily melted coatings
• Tab stock (when using the stacker tray)
❒ Faults can occur if you print onto sides that are already printed. Take care to
print onto unprinted sides only.
the Stacker
13