Additional Operations And Settings; Registering Desired Component (User Ir Setting) - Sony STR-DA90ESG Operating Instructions Manual

Additional Operations and Settings

Registering Desired
Components (User IR setting)
Use the USER IR CODE SETTING menu to register any
IR codes that could not be registered in "Registering
Audio and Video Components" on page 19. By
registering User IR codes, you can control a variety of
appliances (such as air conditioners) as well as audio/
video components. You can register up to 20 User IR
codes.
1
Click SETUP in the main menu to display the
SETUP menu, then click USER IR.
FUNCTION
TV SET
IR SET
USER IR
AUTO START
MACRO PLAY
SPEAKER
DELAY
2
Click A B C D to select a User IR code page, then
click INDEX.
USER IR CODE SETTING
USER A1
USER A2
USER A3
USER A4
USER A5
3
Create a name for the IR code by clicking each
character. The name is automatically stored. To
enter a space, click the space bar. To switch
between upper and lower case letters, click CAPS.
If you made a mistake, click ? or / to move the
cursor to the character to be changed, then click
the correct character.
USER IR CODE SETTING
A B
F G
K L
P Q
U V
CAPS
RETURN
38
SOUND SETUP
FUNC INDEX
CD INDEX
TUNER INDEX
SLEEP TIMER
OSD SETUP
INPUT MODE
EXIT
A B C D
INDEX
START
B b
C D E 1 2 3
H I J 4 5 6
M N O 7 8 9
R S T / 0
*
W X Y Z – +
EXIT
Space bar
4
Click RETURN to go back to the USER IR CODE
SETTING menu, then repeat steps 2 to 4 until you
enter the names of all the IR codes you want to
register.
5
Click the name of the first IR code.
USER IR CODE SETTING
LIGHT 1
LIGHT 2
LIGHT 3
LIGHT 4
LIGHT 5
6
Cover the IR sensor on the respective component
to prevent accidental operation during the
registration procedure.
7
Click START.
When "PUSH YOUR REMOTE" appears on the
TV screen, press the button you want to register.
USER IR CODE SETTING
LIGHT 1
LIGHT 2
LIGHT 3
LIGHT 4
LIGHT 5
RETURN
LEARNING
SENSOR
Your component's remote
When registering the IR code, be sure to do the
following; otherwise, the IR code may not be
registered correctly.
• Point the remote at the LEARNING SENSOR on the
receiver from a distance of less than 4 inches (10 cm).
• Hold down the button on the remote for about 2 or 3
seconds until the "RECEIVING" display switches to
"RELEASE YOUR REMOTE".
• Keep the remote pointed horizontally at the
LEARNING SENSOR until the code is registered.
To register a specific IR code
Click the button where the IR code was registered, then click
START.
A B C D
INDEX
START
A B C D
INDEX
START
CODE CLEAR
EXIT