Sony STR-DA90ESG Operating Instructions Manual page 30

Playback/Recording
p Recording other components to video
tape
1
Click FUNCTION in the main menu.
2
Click the video playback component you want
(VCR 1, VCR 2, LD/DVD, etc.).
3
Click REC.
(If you selected LD/DVD or TV/DBS in step 2
click SUB.)
0
4
Click REC EDIT.
(If you selected LD/DVD or TV/DBS in step 2,
click REC EDIT in the sub menu.)
REC EDIT
5
Click a recording component (e.g., VIDEO 2).
PLAYER
RECORDER
The control buttons for both components appear.
"PLAYER" for the playback component, and
"RECORDER" for the recording component.
The arrow indicates the operative component.
arrow
FUNCTION
PLAYER
/
RECORDER
REC
6
Insert a blank tape into the recording component
(VCR, etc.) and adjust the recording level, if
necessary.
30
–
+ SUB USER
CH
( ) p P REC
–
+ SUB USER
CH
REC CANCEL
VIDEO 1
VIDEO 1
VIDEO 2
DAT/MD
TAPE
EXIT
SOUND SETUP
VIDEO 1
0 ( ) p P
VIDEO 2
0 ( ) p P
EXIT
7
Click REC to start recording, then click the play
button (() on the PLAYER control.
Recording starts. Do not click any RECORDER
controls while recording. This will cut off the
source being recorded.
To stop recording
Click the recording component's p control.
To control the recorder after recording
Click RECORDER. RECORDER becomes the operative
component and you can use the RECORDER controls to
rewind and playback the recording (etc.).
Click PLAYER to operate the playback component.
To return to the main menu
Click EXIT.
p Recording TV programs to video tape
1
Click FUNCTION in the main menu and select a
VIDEO 1 or 2.
2
Tune in the TV program on your video deck.
3
Click REC.
–
+
CH
0 ( )
4
Click REC again to start recording.
–
+
CH
REC EDIT
Note
Signals input to the DIGITAL input jacks cannot be recorded
through analog connections (i.e., to record a digital
broadcast onto a cassette tape, the TV/DBS tuner must be
connected to the receiver's analog (L and R) input terminals).
SUB USER
REC
p P
SUB USER
REC CANCEL