Registering Audio And Video Components - Sony STR-DA90ESG Operating Instructions Manual

Registering Audio and Video
Components
You must register the IR code of your audio/video
component to control your component using the on-
screen display.
IR code registration is unnecessary in the
following case
If your audio/video component is a Sony product that
can be controlled by an infrared remote, and it is
connected to the jacks shown in the following table,
you do not need to register the IR code.
Receiver jacks Component to be connected
VIDEO 1 Sony VTR 3 (VHS)
VIDEO 2 Sony VTR 1 (BETA)
VIDEO 3 Sony VTR 2 (8 mm)
LD/DVD Sony LD player
TV/DBS Sony DBS receiver
DAT/MD Sony DAT deck
CD Sony CD player (CD 1)
TAPE Sony Tape deck
MONITOR Sony TV (via its VIDEO 1 jack)
The following cases require registration of Sony products
• When connecting a Sony MD deck to the DAT/MD
jacks.
• When connecting a Sony audio product with
CONTROL-A1 compatibility.
• When connecting a Sony product to jacks other than
those specified in the previous table (e.g., when
connecting a Sony LD player to the VIDEO 3 jacks).
• When exchanging a non-Sony audio or video
component with a Sony product.
Notes
• If your VCR has a COMMAND CODE selector switch (for
VTR1, VTR2, or VTR3), set the switch to the applicable
setting. If your VCR has a built-in StarSight tuner, you
must set the COMMAND CODE selector switch to VTR 3.
• If your CD changer has a COMMAND MODE selector
switch (for CD 1, CD 2, or CD 3), normally it should be set
to "CD 1." However, if your CD changer has VIDEO OUT
terminals, set the command mode to "CD 2" or "CD 3"
("CD 3" should be used only when making CONTROL-A1
connections).
Setting Up the Remote for On-Screen Control
Registering IR codes
1
Click SETUP in the main menu.
FUNCTION
2
Click IR SET.
FUNCTION
3
Click the name of the receiver's jack you want.
Receiver's jacks
4
• Sony product
Click Sony.
The IR codes are automatically registered and
registration is complete.
To take advantage of CONTROL-A1 compatible audio
components, such as multi-disc CD players, click
CONTROL-A1 to select CONTROL-A1.
• non-Sony product
Click OTHER.
Getting Started
SOUND SETUP
SOUND SETUP
TV SET FUNC INDEX
IR SET CD INDEX
USER IR TUNER INDEX
AUTO START SLEEP TIMER
MACRO PLAY OSD SETUP
SPEAKER INPUT MODE
DELAY
IR CODE SETTING
VIDEO 1 Sony VTR3
Sony VTR1
VIDEO 2
VIDEO 3 Sony VTR2
LD/DVD Sony LD
TV/DBS Sony DBS
TAPE Sony TAPE
DAT/MD Sony DAT
CD Sony CD1
RETURN
Connected
component
IR CODE SETTING
MAKER Sony OTHER
OUTPUT IR
IR CODE SETTING
MAKER Sony OTHER
OUTPUT IR
EXIT
EXIT
(continued)
19