Sony STR-DA90ESG Operating Instructions Manual page 25

To turn off all components
Press SYSTEM OFF (for USA and Canadian models) or ALL
OFF (for Australia) on the remote control.
To mute the sound
Click . The icon changes to
indicator on the front panel lights up. To turn the sound
back on, click on the icon again.
• For USA and Canada : You can also mute the sound by
pressing MUTING on the remote control. The MUTING
indicator on the front panel lights up. Press again to
restore the sound.
z
To listen to digital program sources
Click SETUP in the main menu, then click INPUT
MODE.
INPUT MODE SETTING
AUTO
AUTO
AUTO
AUTO
RETURN
Click the buttons next to each program source to select
the audio signals you desire:
• AUTO : gives priority to digital signals when there
are both digital and analog connections. If there are
no digital signals, analog is selected.
• ANALOG : selects the analog audio signals input to
the AUDIO IN (L and R) jacks.
• DIGITAL (OPTICAL) : selects the digital audio
signals input to the DIGITAL OPTICAL IN jack.
• DIGITAL (COAXIAL) : selects the digital audio
signals input to the DIGITAL COAXIAL IN jack (LD/
DVD only).
• DIGITAL (AC-3 RF) : selects the digital RF audio
signals input to the DIGITAL AC-3 RF IN jack (LD/
DVD only).
z
You can play video and audio components at the
same time
Play a video component you want, then play audio
component. Make sure the AUTO PLAY function is set
to off (see page 40).
. The MUTING
LD/DVD
TV/DBS
DAT/MD
CD
EXIT
Playback/Recording
Notes
• Components of the same type (e.g., Sony LD player) will
be controlled simultaneously by the on-screen controls.
• If a component does not respond, it may be because IR
codes from the IR emitter are not fully reaching the
component. In this case, connect the extra IR repeater
(supplied) and position it facing the component (see
"Infrared (IR) Repeater Hookups" on page 6). If the IR
repeater is already connected, change the position of the
IR repeater or program source.
25