Table of Contents
Advertisement
Update the Base Profile for the Trio System
You can use the Trio system as an audio speakerphone by setting the Base Profile to Skype USB
Optimized.
Polycom recommends connecting the Trio system to the network while updating the base profile.
Procedure
1. Connect a USB cable from the Trio system to the MSR Dock.
2. Do one of the following:
▪
In the Trio system web interface, go to Simple Setup > Base Profile, and select Skype
USB Optimized from the list and click Save.
▪
On the Trio system, go to Setup > Advanced > Administrative Settings > Network
Configurations > Base Profile and select Skype USB Optimized.
Verify the Trio System Software Version
You can view the Trio system software version using the local interface, web browser or the Control Panel
application.
Procedure
1. Do one of the following:
▪
On the Trio system, go to Settings > Status > System Information. Enter the IP address of
the Trio system in a web browser and enter the Admin password (the default password is
456).
The software version displays in the Home screen under UC Software Version.
▪
In the Control Panel application software, enter the administrator password and click
System Status.
Polycom, Inc.
Setting Up Polycom MSR Series
7
Advertisement
Table of Contents
