Table of Contents
Advertisement
The software version displays in the Home screen under UC Software Version.
▪
In the Control Panel application software, enter the administrator password and click
System Status.
Update the Polycom EagleEye IV USB Camera System Software
You can use a USB drive to update the camera system software version. The Polycom EagleEye IV USB
camera system version 1.0.0.388 or later supports Windows Update.
Ensure the following before updating the camera system software:
▪
Use a USB drive with at least 64 MB of available space.
▪
Make sure the file system is in FAT32 format.
Note: Do not remove the USB drive during the software update process.
Procedure
1. Download the latest software image of the camera system from the MSR Series page on the
Polycom support
2. Copy the Polycom EagleEye IV USB camera image (polycom-MSRCam-x.x.x-xxx.tar.gz)
into the USB root directory.
3. Plug in the Polycom EagleEye IV USB camera power cable to power on and allow the camera
system to fully boot up.
4. Plug the USB drive into the Polycom EagleEye IV USB camera system.
The Polycom EagleEye IV USB camera system starts the image update and the LED blinks
amber. The Polycom EagleEye IV USB camera system automatically reboots when the image
update is complete. The camera tilts up and then down during the reboot.
5. Remove the USB drive.
Set the Camera Home Position
You may want to set a camera Home position to use as a default.
Procedure
1. Press and hold the Select button for 5 seconds until the LED light blinks green.
Move to the Camera Home Position
You may want to move to a previously set camera Home position.
Procedure
1. To move to camera Home position, press the Select button.
Waking the Polycom EagleEye IV USB Camera System
You can wake the Polycom EagleEye IV USB camera system in the following ways:
▪
Press any button on the remote control.
Polycom, Inc.
site.
Setting Up Polycom MSR Series
13
Advertisement
Table of Contents
