Configuring The Receiver; Calling Up/Ending The Menu - Sennheiser Tourguide 1039 Instruction Manual

Configuring the receiver

14 |
Tourguide 1039
Configuring the receiver

Calling up/ending the menu

You can only call up the menu when the receiver is switched off.
C
Press the ESC button
Turn the volume control
on.
The Setup display appears on the display panel.
To end the menu:
Switch the receiver off (see page 11).
When switching the receiver on again, the standard display will be
shown.
and keep it pressed.
1
clockwise until it clicks to switch the receiver