Table of Contents
Advertisement
Using the receiver
Ch 4
English
12 |
Tourguide 1039
To adjust the volume:
WARNING
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to per-
manent hearing defects.
Set the volume to a low level before using the product.
Do
not
continuously expose yourself to high volumes.
Turn the volume control
– clockwise to increase the volume
– counterclockwise to reduce the volume.
Using the "Limiter" function, you can reduce the audio level of the
headphone output (see page 18).
Deactivating the lock mode temporarily
If the automatic lock mode
to temporarily deactivate it in order to be able to operate the receiver:
SET
Press the
SET
button.
"Locked" appears on the display pane.
Press the rocker button.
"Unlock?" appears on the display panel.
SET
Press the
SET
button.
The lock mode is deactivated.
G
The lock mode icon
flashes prior to the lock mode being activated again
(if no button has been pressed for approx. 10 seconds).
Setting the receiving channel
If several guided tours take place within a building at the same time, i.e.
several transmission links are operated simultaneously, the user can switch
the channel of the receiver to the channel that is stated by the tour guide.
To switch between the receiving channels:
Press the rocker button.
The receiver immediately switches to the new receiving
channel. If the receiver receives a transmitter on the new
channel, the green LED
The "Active" function allows you to show or hide the receiving chan-
nels from the standard display (see page 21).
1
"Auto
Lock" is activated (see page 17), you have
5
lights up.
Advertisement
Table of Contents
