Putting The Devices Into Operation; Ek 100 G3 Diversity Receiver; Inserting The Batteries/Accupack - Sennheiser EK 100 G3 Manual

Diversity receiver
Hide thumbs Also See for EK 100 G3:
Table of Contents

Advertisement

ew 100 P G3 Set _529660_0309_Sp9.book Seite 10 Mittwoch, 8. April 2009 6:57 18

Putting the devices into operation

10
Putting the devices into operation

EK 100 G3 diversity receiver

Inserting the batteries/accupack

For powering the diversity receiver, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
Open the battery compartment by pushing the two catches
arrows and open the cover ¾.
¾
µ
Insert the two batteries or the accupack as shown above. Please observe correct polarity
when inserting the batteries/accupack.
Close the battery compartment by pressing on the center of the cover ¾.
The battery compartment cover
Charging the accupack
To charge the BA 2015 accupack:
Insert the diversity receiver into the L 2015 charger (optional accessory).
The L 2015 simultaneously charges up to two devices, e.g. two diversity receivers or
one diversity receiver and one SK 100 G3 bodypack transmitter.
The L 2015 charger can only charge the BA 2015 accupack. Standard batteries
(primary cells) or individual rechargeable battery cells cannot be charged.
¾
´
¾
locks into place with an audible click.
µ
in the direction of the

Advertisement

Table of Contents
loading

Table of Contents