MULTIQUIP AR14H Operation Manual page 34

Figure 34 shows the removal of the motor and shock
mounts from the left side of the front drum.
1. JACK FRAME UP SLIGHTLY AT ARTICULATION
JOINT.
2. REMOVE 4 ALLEN HEAD SCREWS HOLDING THE
COVER OF THE DRUM SUPPORT PLATE AND
REMOVE COVER.
DRUM
SUPPORT
PLATE
MOTOR
STEP 4
Figure 34. Motor and Shock Mounts Removal/Installation (Front Drum - Left Side)
PAGE 34 — AR14H RIDE-ON ROLLER • OPERATION MANUAL — REV. #3 (09/06/19)
STEP 1
STEP 2
COVER
FRONT DRUM
STEP 6
3. REMOVE FOUR BOLTS FROM DRUM SUPPORT
PLATE. (BOLTS MAY NEED TO BE HEATED TO
REMOVE).
4. REMOVE 4 BOLTS SECURING MOTOR TO THE
SUPPORT PLATE.
5. MARK AND DISCONNECT HOSES
FROM MOTOR AND MANIFOLD.
REMOVE MOTOR AS NECESSARY.
6. REMOVE AND REPLACE SHOCK
MOUNTS AS NECESSARY.
7. REVERSE PROCEDURE TO INSTALL
M OTO R O R S H O C K M O U N T S .
REASSEMBLE DRUM. USE LOCKTITE
271 ON ALL BOLT THREADS.
SHOCK
MOUNT
MAINTENANCE
STEP 3
STEP 5
DRUM
SUPPORT
PLATE