Wires-X Setting Mode Menus; Wires-X Setting Mode List; Using The Wires-X Setting Mode; Setting The Operating Frequencies For Repeaters/Wires-X - Yaesu FT3DR Instruction Manual

WIRES-X Setting Mode Menus

WIRES-X setting mode list

Menu/Item
1 RPT/WIRES FREQ
2 SEARCH SETUP
3 EDIT CATEGORY TAG
4 REMOVE ROOM/NODE
5 DG-ID

Using the WIRES-X setting mode

Setting the operating frequencies for repeaters/WIRES-X

Select whether to set the frequency manually or use the preset (registered in advance)
frequency when connecting to a local node.
1
Press and hold the [DISP] key → Touch [WIRES-X] → [1 RPT/WIRES FREQ].
2
Rotate the DIAL to select [MANUAL] or [PRESET].
Every time the DIAL is rotated, the setting switches
between [MANUAL] and [PRESET].
MANUAL: Set the frequency every time you look for
a local node.
PRESET: Preset the frequency you use to look for
the local node.
3
Selecting [PRESET] and pressing the [DISP] key
displays the frequency select screen.
4
Rotate the DIAL to select the frequency you want to
preset.
Tips • Rotating the DIAL changes the frequency by the
increments specified in setting mode.
• Touching [BAND] switches the band of the preset
frequency.
5
Press the PTT.
Sets the frequency and returns the screen to the frequency display screen.
Functions
Setting the operating frequencies
for repeaters/WIRES-X
Setting preset frequencies
Setting the item order on the node
& room lists
Deleting registered nodes/rooms
Deleting registered nodes/rooms
Setting the DG-ID
36
Setting items
(Bold items are default settings.)
MANUAL/PRESET
Depends on the transceiver version.
HISTORY / ACTIVITY
C1 to C5
C1 to C5
1 to 20 in total in each category
AUTO / 01 to 99
1 RPT/WIRES FREQ
MANUAL
1 RPT/WIRES FREQ
PRESET
: 145.375 MHz