Wires-X Setup Menu; Wires-X Setup Menu List; Using The Wires-X Setup Menu; Setting The Operating Frequencies For Repeaters/Wires-X - Yaesu FTM-100DR/DE Instruction Manual

WIRES-X Setup Menu

WIRES-X setup menu list

Menu/Item
1 RPT/WIRES FREQ
2 DG-ID

Using the WIRES-X setup menu

Setting the operating frequencies for repeaters/WIRES-X

Select whether to set the frequency manually or use the preset (registered in advance)
frequency when connecting to a local node.
For details, refer to "Presetting a channel" on page 13.

The DG-ID feature to access the WIRES-X node station

When accessing to the WIRES-X node station, the connecting node station may be
selected in accordance with the DG-ID setting of the node stations.
1
Press and hold
2
Rotate the DIAL to select "7 WIRES-X".
3
Press .
4
Rotate the DIAL to select "2 DG-ID".
5
Press .
6
Rotate the DIAL to select the DG-ID setting
01 to 99: Only nodes matching the set DG-ID number may be connected.
AUTO: Only open nodes, set to the DG-ID number "00" may be connected.
7
Press and hold
operation.
Functions
Setting the operating
frequencies for repeaters/
WIRES-X
Setting preset frequencies
Setting the DG-ID number
for over one second.
for over one second to save the setting and return to normal
33
Setting items
(Bold items are default settings.)
MANUAL/PRESET
146.550
AUTO / 01 to 99