WIRES-X Setup Menus
WIRES-X setting mode list
Setup Menu no. / item
1 RPT/WIRES FREQ
2 SEARCH SETUP
3 EDIT CATEGORYTAG
4 REMOVE ROOM/NODE
5 DG-ID
Using the WIRES-X setup menu
Setting the operating frequencies for repeaters/WIRES-X
The [D X] key can be set to always use the preset frequency when searching for the
local node.
For details, refer to "Using preset channels" on page 13.
Setting the item order on the node & room lists
To change the sort criteria of the list of connection destinations on the Internet:
1. Press and hold the [F(SETUP)] key [WIRES-X] [2 SEARCH SETUP]
2. Press the DIAL knob to select "HISTORY" or
"ACTIVITY".
HISTORY: Displays the list sorted in order of the con-
nection destination that your station most
recently connected to.
ACTIVITY: Displays the list sorted in descending or-
der from the room with the most nodes
connected. Nodes come after rooms.
3. Press the [DISP] key or PTT switch to complete the setting.
Editing category names
Five categories can be named where nodes and rooms are registered. Up to 16
alphanumeric characters can be used for each category name.
For details, refer to "Registering a node or room" on page 14.
Description
Setting the operating
frequencies for repeaters/
WIRES-X
Setting preset frequencies
Setting the item order on the
node & room lists
Editing category names
Deleting registered nodes/
rooms
Setting the DG-ID
29
Selectable options
(Options in bold are the default settings)
MANUAL / PRESET
Depends on the transceiver version.
HISTORY / ACTIVITY
C1 to C5
C1 to C5
1 to 20 in total in each category
01 to 99 / AUTO
WIRES-X
HISTORY
1
RPT/WIRES FREQ
2
SEARCH SETUP
3
EDIT CATEGORYTAG >
4
REMOVE ROOM/NODE >
>