Yaesu FT3DR Instruction Manual page 12

5
Touch the node or room you want to connect to.
Starts connection.
Tips • Rotate the DIAL to select the node or room you want to
connect, then press PTT to establish a connection.
• Once connection is successfully established, the menu
list of the node (room) you are connected to will appear.
• If connection is unsuccessful, an error message appears
and the screen returns to the list of nodes and rooms.
z Connecting to the node or room you have most recently connected
If you have previously connected to a node or room on the Internet, it appears and flashes
at the bottom of the screen.
Touch the flashing node or room to start connection, and once connection is established,
the menu list of the node (room) you are connected to will appear.
If is displayed on the left side of the node name at the
bottom part of the screen, rotate the DIAL to display the
node most recently connected.
Tip If connection is unsuccessful, an error message appears and
the name flashes again.
12
JA1Y
JA1YOE-TKY-ROOM
JA1YOE-ROOM-A
JA1YOE-ROOM-B
JA1YOE-ROOM-C
JQ1YBG-ND
JQ1YBG-ND1 Shinagawa-
SEARCH & DIRECT
JA1YOE-ROOM12345
[ 24]
21
4
3
0
24