Replacing Your Access Card - Sony SAT-A1 Operating Instructions (primary manual) Operating Instructions Manual

Replacing Your Access Card

Caution
Handle the door gently to avoid
breaking it.
66
Chapter 6: Using the Installation Menu
In the event that your program providers need to send you a new
access card, use the Replace Access Card option to initialize your new
card. During this process, you'll follow the on-screen instructions to
copy information from the old card onto the new card. After you
initialize the new card, your old card becomes invalid.
To replace your access card:
1
Insert your old access card, if you removed it, as follows:
Open the door to the access card: Place your fingertip in the slot as
shown (or carefully use the edge of a coin), and gently pull the
door down.
Then insert the card, arrow side up, as shown, and gently push the
door up to close it.