Adjusting system
settings
New Access Card
24
Using the menus
Use the pop-up button board to enter search words. You can highlight and
the toggle icon
SELECT
to a standard keyboard layout, if you desire. Highlight the desired letter using
the navigation buttons. Press
finished entering the desired search words.
Using the toggle key to switch button board layout
Select the
tab from the
System
described in this section.
Highlight the
New Card
card.
the Prepare new card menu button and follow the on-screen
SELECT
instructions.
Use the
PREFERENCES
appearance of the on-screen menus and select how your DIRECTV Receiver
operates with other devices. The
• Change the receiver ID
• Set the receiver output channel to channel 3 or 4
on the default button board (see figure) to change it
to enter the letter. Select OK when you are
SELECT
to access the system functions
MAIN MENU
tab to set the receiver to use a new DIRECTV access
Prepare New Card menu pane
menu pane (shown in the figure below) to change the
PREFERENCES
pane also allows you to: