Sony SAT-A1 Operating Instructions (primary manual) Operating Instructions Manual page 46

Digital satellite system
Hide thumbs Also See for SAT-A1 Operating Instructions (primary manual):
Table of Contents

Advertisement

Changing/Checking/
Clearing Timer Settings
Notes on Using
the Timer
46
Chapter 4: Using the System Features
To change, check, or clear timer settings:
1
Bring up the Timer Setup screen, as described on page 44.
2
Check your settings.
Y
If you don't want to make any changes, select OK to return to
the System Menu.
Y
If you want to change or clear settings, select the numbered
button of the timer setting you want to change.
TIMER SETUP
DAY
START
1
11/4 SAT
8:30PM
2
-/--
-:--
3
-/--
-:--
4
-/--
-:--
-/--
-:--
5
-/--
-:--
6
-/--
-:--
7
3
Change or clear the setting as follows:
Y
To change the setting, move the joystick left or right to
highlight the item you want to change. Then reset the item by
moving the joystick up or down.
Y
To clear the setting, select CLEAR.
4
Select OK to save your selections and return to the System Menu.
Y
After the timer is set, the MESSAGE/TIMER indicator on the front
panel lights, indicating that the timer has been set.
Y
To use the timer to record a PPV program, you must first purchase
it in advance of its showing. See "Ordering Pay-Per-View
Programs" on page 32.
Y
If locks and limits are set (and the system is locked), check to make
sure they do not conflict with the program you're trying to record.
Y
About 60 seconds before the timer automatically tunes to the
specified channel, a message appears. To cancel the timer setting
and continue watching the current program, press the EXIT button.
Y
If you set overlapping (conflicting) timer settings, the DSS receiver
handles these timer settings as follows:
Y
If you set two timer settings to start at the same time, the timer
setting that's listed first has priority over any other conflicting
timer settings. Conflicting timer settings are automatically
cleared from the Timer Setup screen when the first timer
setting is activated.
Y
If you set a second timer setting to start before the first timer
setting is set to stop, the second timer setting will start before
the first timer setting stops.
STOP
CH# STATION
10:30PM 987 SHOW
-:--
---
----
-:--
---
----
-:--
---
----
-:--
---
----
-:--
---
----
-:--
---
----
OK
CANCEL
CLEAR
HELP

Advertisement

Table of Contents
loading

Table of Contents