Connecting an Audio System
For more dynamic sound, connect an audio system
to the projection TV.
1
Using an AUDIO cable, connect AUDIO
(VAR) OUT on the projection TV to one of the
unused Line inputs (e.g. Tape-2, AUX1, etc.)
on the stereo (White-AUDIO Left, Red-
AUDIO Right).
2
Set the stereo to the chosen Line input and use
the AUDIO menu to switch the projection TV's
speakers off. (see "SPEAKER" on page 36)
Note:
• You can adjust VOLUME, BASS, TREBLE and
BALANCE through the projection TV on AUDIO
(VAR) OUT only.
20
Disconnect all power sources before making any connections.
(Rear of projection TV)
AUDIO OUT
AUDIO (VAR) OUT-L
FIX
VAR
L
R
AUDIO (VAR)
OUT-R
1
RK-74A
(not supplied)
Line input
HRD
Stereo amplifier