Connecting An Amplifier That Supports Dolby Pro Logic Decoder - Sony KP 53HS10 Operating Instructions Manual

Connecting an Amplifier That
Supports Dolby Pro Logic
Decoder
If you use an amplifier with a Dolby Pro Logic
decoder instead of the projection TV's audio
system, you can still use the projection TV's
speaker as a center speaker.
1
Using the speaker cords (supplied with the
amplifier), connect the speaker terminals on
the amplifier to CENTER SPEAKER IN +/–
on the projection TV.
2
Using an AUDIO cable, connect AUDIO (FIX)
OUT on the projection TV to one of the unused
Line inputs (e.g. Tape-2, AUX1, etc.) on the
amplifier (White-AUDIO Left, red-AUDIO
Right).
3
Set the amplifier to the chosen Line input and
use the AUDIO menu to set "SPEAKER" to
"CENTER IN" on the projection TV. (see
"SPEAKER" on page 36)
Disconnect all power sources before making any connections.
(Rear of projection TV)
AUDIO OUT
FIX VAR
L
R
AUDIO (FIX) OUT-R
AUDIO (FIX) OUT-L
2
RK-74A (not supplied)
CENTER IN #
CENTER IN 3
1
3
Line input
Amplifier with Dolby
Pro Logic decoder
Rear
speaker (L)
Front Front
speaker (R)
speaker (L)
Rear
speaker (R)
21