Connecting An Audio System - Sony RA-3B Service Manual

Installing and Connecting the Projection TV (continued)

Connecting an audio system

For more dynamic sound, connect an audio
system to the projection TV.
1
Using an AUDIO cable, connect AUDIO
(VAR/FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the stereo.
2
Set the stereo to the chosen Line input
and use the Audio menu to set the audio
output and switch the TV's speakers off.
(see "Audio Out" and "Speaker" on page
28)
Note:
• You can adjust VOLUME, "Bass,"
"Treble," "Balance," "MTS/SAP" and
"Effect" with the supplied remote control.
The control items except VOLUME can be
adjusted only when "Audio Out" is set to
"Variable" in the Audio menu. (see
"Audio Out" on page 28)
16
Disconnect all power sources before making any connections.
(Rear of projection TV)
IN
VIDEO 1 VIDEO 3 VIDEO 4
OUT
S VIDEO AUDIO
(VAR/FIX)
AUDIO-L
VIDEO Y
(white)
L
L
P
B (MONO)
(MONO)
AUDIO AUDIO
CONTROL S
P R
R R
OUT
COMPONENT
AUDIO-R
(red)
Stereo amplifier
HRD
Line inputs
RK-74A
(not supplied)