Sony KP 53HS10 Operating Instructions Manual page 45

CAPTION VISION
— Television closed caption display
Some programs are
SET UP
PARENTAL CONTROL
broadcast with Caption
CAPTION VISION
SELECT OUT:MONITOR
Vision.
LANGUAGE: ENGLISH
VIDEO LABEL
To display Caption Vision,
DIRECT PLAY
FREEZE MODE:NORMAL
select [ [ [ [ C C C C C C C C ] ] ] ] 1, [ [ [ [ C C C C C C C C ] ] ] ] 2, [ [ [ [ C C C C C C C C ] ] ] ]
DTV INPUT:
ASPECT RATIO:
3, [ [ [ [ C C C C C C C C ] ] ] ] 4, TEXT1,
Move
TEXT2, TEXT3 or TEXT4 from the menu. Then
press the [CC] button until Caption Vision is
displayed.
[ [ [ [ C C C C C C C C ] ] ] ] 1, [ [ [ [ C C C C C C C C ] ] ] ] 2, [ [ [ [ C C C C C C C C ] ] ] ] 3 or [ [ [ [ C C C C C C C C ] ] ] ] 4 displays a printed
version of the dialogue or sound effects of a
program. (The mode should be set to [ [ [ [ C C C C C C C C ] ] ] ] 1 for
most programs.) TEXT1, TEXT2, TEXT3 or
TEXT4 displays network/station information
presented using either half or the whole screen.
Notes:
• Poor reception of TV programs can cause errors in
Caption Vision and XDS.
Captions may appear with a white box or other
errors instead of the intended text.
• XDS, Caption Vision, and the status display cannot
be used at the same time.
SELECT OUT
— Output signal selection from SELECT
OUT
You can select the desired
CC1
CC2
output signal from the
CC3
CC4
SELECT OUT jacks at the
TEXT1
TEXT2
rear of the projection TV.
TEXT3
R.G.B
TEXT4
4:3
MENU
Select Exit
Note:
• SELECT OUT setting is not available for the
inputs from VIDEO 5 (DTV) IN.
MONITOR:
Select to edit tapes while monitoring. SELECT
OUT outputs the picture displayed on the screen.
VIDEO1–VIDEO4:
Select to edit tapes while viewing an input image
different from that being recorded. SELECT OUT
outputs the signal input to the projection TV
regardless of the displayed picture on the screen.
TV OUT:
Select if you connect an AV receiver to VIDEO 1
IN. SELECT OUT outputs the signal that the TV is
tuned to, regardless of the displayed picture. (see
"Connecting an AV Receiver" on page 19 for
connection)
If you select TV OUT, the following pop-up menu
appears.
Select YES only if you
have connected an AV
SET UP
PARENTAL CONTROL
receiver, with no other
CAPTION VISION CC1
SELECT OUT: MONITOR
equipment, to your
LANGUAGE: ENGLISH
VIDEO1
VIDEO LABEL
VIDEO2
DIRECT PLAY projection TV. You can
VIDEO3
FREEZE MODE:NORNAL
VIDEO4
DTV INPUT: R.G.B TV OUT TV OUT always select the signal
ASPECT RATIO: 4:3
from the receiver by
MENU
Move Select Exit
pressing TV/VIDEO once.
Select NO if you have connected multiple
components to your projection TV. You can select
an input (VIDEO1 – VIDEO5) with the TV/
VIDEO button.
Note:
• The SELECT OUT signal is only available when
the projection TV is on.
LANGUAGE
— User's preferred language
Select from available languages (ENGLISH,
ESPAÑOL or FRANÇAIS) to display all menus
in your language of choice.
SET UP
PARENTAL CONTROL
CAPTION VISION: CC1
SELECT OUT:
MONITOR
LANGUAGE:
VIDEO1
VIDEO LABEL
VIDEO2
DIRECT PLAY
VIDEO3
FREEZE MODE: VIDEO4
DTV INPUT: R.G.B TV OUT
DTV ASPECT: 4:3
Set up using YES
only VIDEO1 input? NO
Move Select Exit MENU
(continued)
41