Connecting An Audio System - Sony KP-57XBR10W Operating Instructions Manual

Connecting an Audio System

For more dynamic sound, connect an audio system
to the projection TV.
1
Using an AUDIO cable, connect AUDIO
(VAR) OUT on the projection TV to one of the
unused Line inputs (e.g. Tape-2, AUX1, etc.)
on the stereo (White-AUDIO Left, Red-
AUDIO Right).
2
Set the stereo to the chosen Line input and use
the AUDIO menu to switch the TV's speakers
off. (see "SPEAKER" on page 38)
Note:
• You can adjust VOLUME, BASS, TREBLE and
BALANCE through the projection TV on AUDIO
(VAR) OUT only.
Disconnect all power sources before making any connections.
(Rear of projection TV)
L L
R R
AUDIO (VAR) OUT-L
AUDIO OUT
FIX VAR
L
R
AUDIO (VAR)
OUT-R
1
RK-74A
(not supplied)
Line
input
INPUT SELECTOR VOLUME
PROTECTION
POWER
EON LINK TAPE1/DAT TAPE2/MD AUX SACD/CD TUNER PHONO
EON LINK SPEAKERS BASS TONE TREBLE BALANCE TAPE MONITOR
OFF A • B • 0 • 0 • LOUDNESS SUBSONIC SOURCE DIRECT
A B + ¯ ON ¿ OFF ¯ ON ¿ OFF TAPE1 SOURCE • TAPE2 0 10
PHONES
– 10 + 10 – 10 + 10 LEFT RIGHT
Stereo amplifier
21