USB board
Table 5-10
USB board description and part number
Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the keyboard/top cover (see
3.
Remove the battery (see
Remove the USB board:
1.
Disconnect the cable from the ZIF connector on the USB board (1).
2.
Remove the Phillips M2.5 × 4.0 screw (2) that secures the board to the computer.
3.
Remove the USB board from the computer (3).
Reverse this procedure to install the USB board.
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page
31).
Spare part number
L58583-001
24).
24).
Component replacement procedures
37