Turning On The Power - Ricoh PG-C2 Operating Instructions Manual

Note
❒ When the message "
" is displayed, follow the instructions and press [Restart] at the bottom
ror.
right-hand corner of the screen after the process is completed.
❒ If the "
Temperature Alert
See "Where to Put Your Machine", Troubleshooting.
❒ If you have inadvertently set "Set Date" to a date in the future, the machine
may take longer than usual to start printing or to initialize after being
switched on. If this is the case, do not switch the machine off; instead, wait
about 10 minutes.

Turning On the Power

Turn on the power as follows:
A
Press the operation switch.
The operation switch indicator goes on.
Note
❒ If the power does not come on when the operation switch is pressed, check
the main power switch is on. If it is off, turn it on.
Restart is required due to a functional er-
" message appears, check the installation site.
BDU008S
Turning On/Off the Power
1
27