Table of Contents
Advertisement
Getting Started
30.
Quick Dial Flip Plate
Tilt the plate downward to change from
the {Quick Dial 01} key to the {Quick Dial
16} key. Tilt the plate upward to change
from the {Quick Dial 17} key to the {Quick
1
Dial 32} key.
31.
{Job Information} key (scanner
and facsimile mode)
Press to obtain status information on
transmitted data.
32.
{On Hook Dial} key (facsimile
mode)
Press this to hear dial and data tones on
the fax line while dialing, as if the hand-
set were off the hook. For details, see "On
Hook Dial", Facsimile Reference.
33.
{Pause/Redial} key (facsimile
mode)
• Pause
Press to insert a pause in a fax dialing
sequence. You cannot insert a pause at
the beginning of a sequence. The
pause is indicated by "-".
• Redial
Press this to select a recently-dialed
destination. For details, see "Specify-
ing a Destination", Facsimile Reference.
Reference
p.21 "Display"
p.26 "Turning On/Off the Power"
p.31 "Entering Text"
20
34.
{Memory Trans.} key (facsimile
mode)
Press to carry out memory transmission.
See "Transmission Modes", Facsimile
Reference.
35.
{Resolution} key (facsimile
mode)
Press to specify the resolution of the fax.
See "Scan Settings", Facsimile Reference.
36.
User Function keys (facsimile
mode)
You can program frequently used func-
tions in these keys under Set User Func-
tion Key. See "Fax Features", General
Settings Guide.
By default, the following functions are
registered:
{F1} key: Start manual reception
{F2} key: Switch reception mode
{F3} key: Transmission stamp
Advertisement
Table of Contents
