Changing Modes; System Reset - Ricoh PG-C2 Operating Instructions Manual

Changing Modes

This section explains how to change modes.
The following illustrations show screens that appear when all options are installed.
Note
❒ You cannot switch modes when accessing User Tools.
❒ The copy display is set as the default screen when the machine is turned on.
You can change this default setting under Function Priority. See "System Set-
tings", General Settings Guide.

System Reset

This section explains System Reset.
After finishing a job, the machine waits a specified length of time and then re-
stores its settings to the default values specified under Function Priority. This
function is called "System Reset". For procedure for specifying default settings
under Function Priority, see "System Settings", General Settings Guide.
To change the length of time that the machine waits before restoring its settings
to their default values, use the System Auto Reset Timer setting. See "System
Settings", General Settings Guide.
Changing Modes
1
BDU010S
25