Cable & Connector (Option); Accessories (Option) - Contec ADI12-16(PCI) User Manual

Cable & Connector (Option)
Flat Cable with One 37-pin D-SUB Connector
Shielded Cable with One 37-pin D-SUB Connector
Flat Cable with Two 37-pin D-SUB Connectors
Shielded Cable with Two 37-pin D-SUB Connectors
Flat Cable with One 15-pin D-SUB Connector
Flat Cable with Two 15-pin D-SUB Connectors
Coaxial Cable for Single-ended Inputs (16 channels)
2 Wires Shielded Cable for Differential Inputs (8 channels) :
Flat Cable with 1 Sided 16-Pin Header Connector (1.5m)
Conversion Cable (16Pin to 15Pin) with Bracket
37-pin Male Connector Set (5 Pieces)
*1 For FTP-15 only

Accessories (Option)

Termination panel with Screw Terminals for Spade Lugs(M3 screw, 37points)
Termination panel with Screw Terminals(M2.6 screw, 37points)
Screw Terminal(M3 screw, 37points)
Screw Terminal(M3.5 screw, 37points)
Termination panel for Digital I/O on Analog Multi-function Boards
Termination panel with BNC connectors for Analog Multi-function Boards(Analog Input 16ch)
8ch-Isolation Accessory Board for Analog Inputs
Low pass filter expansion board
Buffer amplifier termination panel for analog multi-function box(16ch type) : ATBA-16E*2
*2 A PCB37P or PCB37PS optional cable is required separately.
*3 "Spring-up" type terminal is used to prevent terminal screws from falling off.
*4 A DT-E3 and PCB15P-1.5 optional cable is required separately.
*5 External Power supply is required separately.
* Check the CONTEC's Web site for more information on these options.
ADI12-16(PCI)
1. Before Using the Product
: PCA37P-1.5 (1.5m)
: PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
: PCB37PS-1.5(1.5m)
: PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
: PCA15P-1.5 (1.5m)
: PCB15P-1.5 (1.5m)*1
: PCC16PS-1.5 (1.5m)
: PCC16PS-3 (3m)
PCD8PS-1.5 (1.5m)
: PCD8PS-3 (3m)
: DT/E1
: DT-E3
: CN5-D37M
: DTP-3A *2
: DTP-4A *2
: EPD-37A *2*3
: EPD-37 *2
: FTP-15 *4
: ATP-16 *2
: ATII-8C *2*5
: ATLF-8A *2*5
3