Cable & Connector (Option); Accessories (Option) - Contec DIO-0808L-PCI User Manual

Cable & Connector (Option)
Flat Cable with a 37-Pin D-SUB Connectors at 2 Ends
Shielded Cable with a 37-Pin D-SUB Connectors at 2 Ends :
Flat Cable with a 37-Pin D-SUB Connector
Shelded Cable with a 37-Pin D-SUB Connector

Accessories (Option)

Screw Terminal (M3 x 37P)
Screw Terminal (M3.5 x 37P)
General Purpose Terminal (M3 x 37P)
Screw Terminal (M2.5 x 37P)
*1 A PCB37P or PCB37PS optional cable is required separately.
*2 "Spring-up" type terminal is used to prevent terminal screws from falling off.
* Check the CONTEC's Web site for more information on these options.
DIO-0808L-PCI
1. Before Using the Product
: PCB37P-1.5 (1.5m)
: PCB37P-3 (3m)
PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
: PCB37PS-3P (3m)
: PCB37PS-5P (5m)
: PCA37P-1.5 (1.5m)
: PCA37P-3 (3m)
: PCA37P-5 (5m)
: PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
: PCA37PS-3P (3m)
: PCA37PS-5P (5m)
: EPD-37A *1*2
: EPD-37 *1
: DTP-3C *1
: DTP-4C *1
3