Cable & Connector (Option); Accessories (Option) - Contec AD16-64(LPCI)LA User Manual

Cable & Connector (Option)
Shielded cables with two-ended connector for 68-pin half-pitch connector
Shielded cables with single-ended connector for 68-pin half-pitch connector
68/96-pin conversion shielded cable for analog input/output
* Two sets of cables are required to use both connector CNA and CNB.

Accessories (Option)

Screw Terminal (M2.5 x 96P)
Screw Terminal (M3 x 68P)
Screw Terminal (M3 x 96P)
Screw Terminal (M3.5 x 96P)
BNC Terminal Unit (analog input 32ch)
BNC Terminal Unit (analog input 8ch)
*1 ADC-68M/96F optional cable is required separately.
*2 PCB68PS-0.5P or PCB68PS-1.5P optional cable is required separately.
*3 Two sets of cables are required to use both connector CNA and CNB.
*4 "Spring-up" type terminal is used to prevent terminal screws from falling off.
*5 Can be used in CNA channels 0 - 7 or CNB channels 32 - 39.
* For details on the range channels available to each terminal panel, see Figure 3.2 "Connecting
example of option".
* Check the CONTEC's Web site for more information on these options.
AD16-64(LPCI)LA
1. Before Using the Product
: PCB68PS-0.5P (0.5m)
: PCB68PS-1.5P (1.5m)
: PCA68PS-0.5P (0.5m)
: PCA68PS-1.5P (1.5m)
: ADC-68M/96F (0.5m)
: DTP-64(PC) *1*3
: EPD-68A *2*3*4
: EPD-96A *1*3*4
: EPD-96 *1*3
: ATP-32F *1*3
: ATP-8 *1*3*5
3