Cable & Connector (Option); Accessories (Option) - Contec DIO-1616B-LPE User Manual

1. Before Using the Product
Cable & Connector (Option)
Shield Cable with Two 50-Pin Mini-Ribbon Connector
Shield Cable with One 50-Pin Mini-Ribbon Connector
Connection Conversion 0.5m Shield Cable (50-Pin Ribbon->37-Pin D-SUB)

Accessories (Option)

Screw Terminal Unit(M3 terminal block, 50 points)
Screw Terminal Unit(M3 terminal block, 37 points)
Screw Terminal Unit(M3.5 terminal block, 37 points)
Termination Panel (M3)
Termination Panel
Signal Monitor for Digital I/O
*1 "Spring-up" type terminal is used to prevent terminal screws from falling off.
*2 PCB50PS-*P optional cable is required separately.
*3 PCE50/37PS-0.5P and PCB37P or PCB37PS optional cable is required separately.
* Check the CONTEC's Web site for more information on these options.
4
: PCB50PS-0.5P(0.5m)
: PCB50PS-1.5P(1.5m)
: PCB50PS-3P(3m)
: PCB50PS-5P(5m)
: PCA50PS-0.5P(0.5m)
: PCA50PS-1.5P(1.5m)
: PCA50PS-3P(3m)
: PCA50PS-5P(5m)
: PCE50/37PS-0.5P(0.5m)
: EPD-50A *1 *2
: EPD-37A *1 *3
: EPD-37 *3
: DTP-3A *3
: DTP-4C *3
: CM-32L *3
DIO-1616B-LPE