Cable & Connector (Option); Accessories (Option) - Contec DIO-1616T-PE User Manual

1. Before Using the Product
Cable & Connector (Option)
Flat Cable with 37-Pin D-sub Connectors at either Ends
Shield Cable with 37-Pin D-sub Connector at either Ends (Mold Type)
Flat Cable with 37-Pin D-sub Connector at One End
Shield Cable with 37-Pin D-sub Connector at One End (Mold Type)
D-SUB37P Male Connector Set (5 Pieces)

Accessories (Option)

Screw Terminal Unit (M3 x 37P)
Screw Terminal Unit (M3.5 x 37P)
General Purpose Terminal (M3 x 37P)
Screw Terminal (M2.6 x 37P)
Signal Monitor / Output Accessory for Digital I/O (32P) : CM-32(PC)E *1
*1 A PCB37P-1.5 or PCB37PS-0.5P, 1.5P optional cable is required separately.
*2 "Spring-up" type terminal is used to prevent terminal screws from falling off.
* Check the CONTEC's Web site for more information on these options.
4
: PCB37P-1.5 (1.5m)
: PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
: PCA37P-1.5 (1.5m)
: PCA37PS-0.5P (1.5m)
: PCA37PS-1.5P (1.5m)
: CN5-D37M
: EPD-37A *1*2
: EPD-37 *1
: DTP-3A *1
: DTP-4A *1
DIO-1616T-PE, DI-32T-PE, DO-32T-PE