Contec ADI12-16(PCI) User Manual page 22

Executing the Installation
(1) Follow the on-screen instructions to proceed to install.
(2) When the required files have been copied, the "Perform a hardware setup now(API-TOOL
Configuration)" and "Show readme file" check boxes are displayed.
When you are installing the software or hardware for the first time:
1) Uncheck "Perform a hardware setup now".
2) Click on the [Finish] button.
Go to Step 2 to set and plug the hardware.
* When the hardware has already been installed:
Check "Perform a hardware setup now(API-TOOL Configuration)", then go to Step 4
"Initializing the Software".
You have now finished installing the software.
ADI12-16(PCI)
2. Setup
15