Application Development Information
This chapter describes how to control the printer and gives information useful for printer
application development.
How to Control the Printer
Use ePOS-Print XML to control the printer. See the appropriate manual for details.
Set a longer time to the timeout for printing graphics since it takes longer than printing
texts.
White lines may appear on the printed graphics.
It is recommended that you use Page Mode to print graphics.
Software and Manuals
The following software and manuals are provided for application development.
To use the Utility, connect the printer with a PC for setting via the Micro-USB cable or
After using the Utility, be sure to turn off the printer, and then turn it on.
Utilities
Software/Manual
TMFLogo Utility (TM-FLOGO)
Memory Switch Setting Utility
TM-i series WebConfig API User's Manual
TM-i series PHP Setup Manual
ePOS-Print XML User's Manual
LAN cable. Connecting the printer with a PC via an wireless LAN is not possible.
Chapter 3 Application Development Information
Description
The printer's non-volatile memory (NV
memory) is used to register store logos and
other similar information.
It is used when making changes to the
printer's memory switches and customized
value settings.
See this manual when you use API to set or
check the settings for the TM-L90-i.
See this manual when you establish the
environment where you use the PHP
function and store data in micro SD cards
with the TM-L90-i.
See this manual for details about the ePOS-
Print XML system configuration and
application development methods used for
this product.
3
103