Setting the Memory Switches
This printer has memory switches as software switches for making a variety of settings.
Memory switches include 1/2/8 and customized values.
Memory switch settings are made in memory switch setting mode or with the memory switch
setting utility.
For more information about memory switch setting mode, see
For more information about the memory switch setting utility, see the Memory Switch
For more information about commands, see the "ESC/POS Application Programming
Memory Switch 1
SW
Transmit the power ON
1-1
information
1-2
Capacity of receive buffer
1-3
Reserved
Data processing for receiving
1-4
error
1-5
Automatic line feed
1-6
Reserved
1-7
Pin #6: Selection of reset signal
1-8
Reserved
Memory Switch 2
SW
2-1
Reserved
2-2
Autocutter operation
2-3 to 2-8 Reserved
96
Mode" on page
128.
Setting Utility User's Manual.
Guide".
Function
Function
Fixed to On (Do not change the setting)
ON
OFF
Transmits
Does not transmit
45 bytes
4KB
Fixed to ON
Ignored
Prints "?"
Enabled
Disabled
--
Fixed to Off
Used
Not used
Fixed to ON
ON
OFF
Enabled
Disabled
--
"Memory Switch Setting
Initial
setting
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
Initial
setting
ON
ON
--
OFF